[Coco] Run of RGB2VGA boards

[Zippster]

I guess the only concern would be that you’d be connecting
a couple of things to ground that shouldn’t be.  

One would be the VSYNC input on one of the FPGA pins, that one wouldn’t
hurt anything.  You’d also be grounding the VSYNC output from the CoCo3.
I’d have to review the schematic to guess what the outcome of that might be.

- Ed


> On Sep 14, 2015, at 11:13 PM, Richard E. Crislip <rcrislip at neo.rr.com> wrote:
> 
> On Mon, 14 Sep 2015 16:57:03 -0500
> Zippster <zippster278 at gmail.com> wrote:
> 
>> Yes, you should be ready to go.  Just connect the ribbon cable like
>> this…
>> 
>> <https://drive.google.com/open?id=0B1sgl615FlGnSEF0SW5YTDdPcFk
>> <https://drive.google.com/open?id=0B1sgl615FlGnSEF0SW5YTDdPcFk>>
>> 
>> Then connect to a VGA monitor and USB (for power).
> <snip>
> 
> Ahhhh what happens if you do one end back words? Just asking, I didn't
> do that... for once.
> 
> Cheers
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco