[Coco] NitrOS9 booting sequence

[Bill Nobel]

I am assuming David, you have the standard descriptor/drivers in the boot file?  If yes, it sounds like the padding on REL/BOOT & KRN might be off.  The vectors at the end of KRN need to be specifically at $FFF0.  If that checks out I would look at Init and Sysgo.

Bill Nobel

> On Sep 1, 2015, at 3:10 PM, Dave Philipsen <dave at davebiz.com> wrote:
> 
> Ok, so as everyone has probably figured out I am trying to make some modifications to the REL, Boot, and Krn modules in order to get the CoCo3 FPGA booting directly from the SD card without help from DW.  I'm also trying to accomplish this with native tools under NitrOS9 instead of using the Toolshed and Lwtools packages. So, today I was able to create a boottrack file and svdgen a disk.  When I try to boot it the screen shows all of the modules loaded through Clock2 and then at the end it prints  "i2xo*X" just before the boot fails.  I'm guessing that something is still missing on the boot disk.  I have an OS9Boot file, a sysgo file, and a CMDS directory with just "shell" in it.  What am I missing in order to complete the boot?
> 
> Dave Philipsen
> 
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco