[Coco] Supercomm fails to load on NitrOS9 lvl 2 on my CoCo 3 with 128K, and a couple of other questions?
Bill Pierce
ooogalapasooo at aol.com
Tue Nov 3 23:56:55 EST 2015
Dave, yes, mostly z-modem, but I think most protocols are available. I imaging it's up to the sysop and the system.
I was just on CyberChat with Supercomm and noticed some of the ANSI was a little off... it may be my settings (supercomm & BBS), I may play around with it soon and see what I can come up with.
Does Supercomm support the "extended ibm character set"?
Bill Pierce
"Charlie stole the handle, and the train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull
My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
Global Moderator for TRS-80/Tandy Color Computer Forums
http://www.tandycoco.com/forum/
E-Mail: ooogalapasooo at aol.com
-----Original Message-----
From: Dave Philipsen <dave at davebiz.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Tue, Nov 3, 2015 11:49 pm
Subject: Re: [Coco] Supercomm fails to load on NitrOS9 lvl 2 on my CoCo 3 with 128K, and a couple of other questions?
Wow, that's cool! I'm going to have to try this stuff out on my CoCo3FPGA.
I'd really like to load in an IBM-style font and see what the BBSs look like
with all of the proper line drawing characters and other stuff. My even give me
some impetus to dust off Supercomm and make some revisions....
Thanks for the
leads on the BBSs. Would I be correct in assuming that they still use
x/y/zmodem for transferring files?
Dave Philipsen
> On Nov 3, 2015, at 10:24
PM, Bill Pierce via Coco <coco at maltedmedia.com> wrote:
>
> Dave, there's pretty
much anything you want in an online/telnet BBS if you look for it :-)
>
> Just
a small guide to some telnet BBSs:
>
> http://www.telnetbbsguide.com/
>
> It's
frequently updated.
> And there are 2 "specifically Coco" BBSs by Coco Users..
>
> Bill Gordon's "SquareOne BBS" (some Coco stuff)
>
http://sq1bbs.com/index.php
> 98.175.102.203:2300
>
> Phillip Taylor's
"CyberChatNet BBS" (tons of Coco stuff)
> http://cyberchatnet.dynu.com/
>
>
71.68.29.241:23
>
>
>
>
> Bill Pierce
> "Charlie stole the handle, and the
train it won't stop going, no way to slow down!" - Ian Anderson - Jethro Tull
>
>
>
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
>
https://sites.google.com/site/dabarnstudio/
> Co-Contributor, Co-Editor for
CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> Global Moderator
for TRS-80/Tandy Color Computer Forums
> http://www.tandycoco.com/forum/
>
>
E-Mail: ooogalapasooo at aol.com
>
>
>
>
>
>
> -----Original Message-----
>
From: Dave Philipsen <dave at davebiz.com>
> To: CoCoList for Color Computer
Enthusiasts <coco at maltedmedia.com>
> Sent: Tue, Nov 3, 2015 10:52 pm
> Subject:
Re: [Coco] Supercomm fails to load on NitrOS9 lvl 2 on my CoCo 3 with 128K, and
a couple of other questions?
>
>
> Yes, Supercomm has always defaulted to /t2
but allows you to connect to any
> other port with the command line option. The
2k buffer with a program size of
> less than 16k makes it very memory efficient.
The program was written entirely
> in assembler. At the time I wrote it I tested
it against other terminal programs
> and it d/l'd faster than most. As I
recall, the xmodem and ymodem CRCs and
> checksums are computed "on the fly"
instead of at the end each block which saves
> a little bit of time between
blocks and allows it to send an ACK more quickly
> for the next block. I wrote
it because I had pretty much abandoned DECB for OS9
> and, at the time, there
were no decent terminal programs that worked with ANSI
> codes. I was always
using Procomm Plus on my PC to connect to BBSs and wanted
> similar
functionality under OS9.
>
> So, a few questions, approximately how many
>
'telnet BBSs' are there running now? Are they simply versions of the old BBS
>
systems that are converted to work over the internet? Do these BBSs mostly
use
> the ANSI control codes that were common back in the 80s & 90s?
>
>
Dave
> Philipsen
>
>>> On Nov 3, 2015, at 7:55 PM, Bill Pierce via Coco
>>
<coco at maltedmedia.com> wrote:
>>
>> Robert, Yes, Supercomm apparently
overrides
> the hard coded descriptor used internally when there is a descriptor
on the cmd
> line.
>> Also, I am using the version of Supercomm from the NitrOS9
repo, not the
> original from the archives. I'm not sure if there's a difference
or if the Nitro
> version has been modified for this.
>> I have been logging
onto online BBSs from
> my Coco for almost 2 years now, so yes, I know this
works. I am not the only
> one. Several others use Supercomm for dw4/telnet
communications.
>> In fact, I
> just checked the Supercomm 2.2a documentation
and this is the cmd line usage:
>
>> SuperComm [port] [f=pathlist]
[buffersize]
>>
>> port Optional
> port specification. SuperComm
defaults to /t2
>> f=pathlist Opens a capture
> buffer on startup.
>>
-f=pathlist Set up (but don't open) a capture buffer.
> (See Buffer
Capture, in the File Transfer Menu)
>> buffersize Expands the
> buffer
beyond the default size of 2K. This applies to all downloads, not just
> the
capture buffer.
>>
>> It defaults to "/t2" but cmd line will override the
>
default. So apparently, it's always been that way.
>>
>>
>>
>>
>>
>>
>>
Bill
> Pierce
>> "Charlie stole the handle, and the train it won't stop going,
no way to
> slow down!" - Ian Anderson - Jethro Tull
>>
>>
>>
>> My Music
from the
> Tandy/Radio Shack Color Computer 2 & 3
>
https://sites.google.com/site/dabarnstudio/
>> Co-Contributor, Co-Editor for
>
CocoPedia
>> http://www.cocopedia.com/wiki/index.php/Main_Page
>> Global
Moderator
> for TRS-80/Tandy Color Computer Forums
>>
http://www.tandycoco.com/forum/
> E-Mail: ooogalapasooo at aol.com
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
> From: Robert Gault
<robert.gault at att.net>
>> To: CoCoList for Color Computer
> Enthusiasts
<coco at maltedmedia.com>
>> Sent: Tue, Nov 3, 2015 8:36 pm
>> Subject:
> Re:
[Coco] Supercomm fails to load on NitrOS9 lvl 2 on my CoCo 3 with 128K, and
> a
couple of other questions?
>>
>>
>> Bill Pierce via Coco wrote:
>>> Robert
(and
> others), first of all, no modification
>> is needed at all to run
SuperComm under
> NitrOS9 becker OR NitrOS9 DW.
>> DriveWire4 has a "builtin"
modem emulation and
> will connect to online "telnet"
>> BBSs and other telnet
services. Under NitrOS9
> dw or becker (with internet
>> connection on the dw4
server) just type:
> supercomm /n
>>
>>
>>> <snip>
>>
>> Bill,
>>
>> Have
you tried this with supercomm?
> That program has /t2 hard
>> coded so there is
>> a chance you can't use /n.
>
>> Robert
>>
>>
>>
>> --
>> Coco
mailing
>> list
>> Coco at maltedmedia.com
>
https://pairlist5.pair.net/mailman/listinfo/coco
>>
>>
>>
>> --
>> Coco
mailing
> list
>> Coco at maltedmedia.com
>
https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing
>
list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
>
https://pairlist5.pair.net/mailman/listinfo/coco
--
Coco mailing
list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco
More information about the Coco
mailing list