[Coco] Zippster's Coco2 composite board

[lciotti at lrlc.us]

Ed,

Lost track of this, are your two versions ready for purchase?

Sent from my iPhone

> On May 25, 2015, at 10:17 AM, Zippster <zippster278 at gmail.com> wrote:
> 
> Hi Ben,
> 
> While I have not tried this, it may work.  I base saying that on the fact that there
> are other composite boards (with 1372 on board) that install alongside the RF box, so
> it would seem that the 6847 can drive two 1372s simultaneously (maybe).  
> 
> Of course you’d have to mount it somewhere else and run leads to everything.  
> That could possibly introduce some noise.
> 
> These are great for replacing the modulator, however, if you want to keep the RF box,
> I think maybe a solution that plugs into the 6847 socket would be better.
> 
> - Ed
> 
> 
>> On May 25, 2015, at 1:20 AM, Ben Anding <benanding at outlook.com> wrote:
>> 
>> 
>> 
>> 
>> Hello,
>> 
>> 
>> I was just wondering if Zippster's Coco2 output hardware mod can be installed without replacing the RF modulator. Specifically, I'm wondering if the MC6847 could be used to drive both the composite board modification and the RF modulator. 
>> 
>> Best regards,
>> 
>> Ben
>> 
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco