[Coco] Nitros9 build fails

[Bob Devries]

Hi Tormod and William,

I followed the instructions on the Sourceforge wiki: 
http://sourceforge.net/p/nitros9/wiki/Building_NitrOS9/

If this is wrong, why is it there?

I'm using Lubuntu 14:10 because my linux box has limited resources; only 
2GB memory. I tried to use 15:04, but it simply would not work reliably, 
especially when trying to build NitrOS9.

I will try your version of lwtools and toolshed, Tormod, and report back

BTW, my box is a HP DX2200 with a Pentium4 64bit processor.

Regards, Bob Devries
Dalby, QLD, Australia


On 23/05/2015 6:14 PM, Tormod Volden wrote:
> On Sat, May 23, 2015 at 9:34 AM, Bob Devries wrote:
>> Hi all,
>>
>> I have just upgraded to Lubuntu 14:10. gcc = 4.9.1. Make = GNUMake 4.0.
>> I built lwtools and toolshed, but the NitrOS9 build fails at minted.asm.
>
> Please try my lwtools and toolshed packages from
> https://launchpad.net/~tormodvolden/+archive/ubuntu/m6809 so that we
> can eliminate any problems with your builds.
>
>> The errors appear to be:
>>
>> WARNING: IFP1 if is not supported; ignoring
>> /home/bdevries/nitros9/level1/cmds/minted.asm:00013  ifp1
>>
>> ERROR: Byte overflow
>> /home/bdevries/nitros9/level1/cmds/minted.asm:00467  anda  #~$80
>
>>
>> I'd have to assume that the tilde (~) is in error, but why was it used?
>
> It inverts the bits, so anda #~mask turns off the bits in "mask",
> while ora #mask would turn them on.
>
> BTW, any good reason you use Lubuntu 14.10 instead of the stable 14.04
> or the newer 15.04?
>
> Tormod
>