[Coco] 1 meg coco 3

[Josh Harper]

thanks Bill
wish I knew how to use nirios09 and os9
is the memory easy to check with nitros09
is there any other software out there that uses the 1 meg
thanks
       From: Bill Pierce via Coco <coco at maltedmedia.com>
 To: coco at maltedmedia.com 
Cc: Bill Pierce <ooogalapasooo at aol.com> 
 Sent: Thursday, April 30, 2015 11:55 PM
 Subject: Re: [Coco] 1 meg coco 3
   
Josh, plug the 1-meg in first. It must be powered before the Coco comes on.
A memory check program would be needed to see if the memory is working. I don't have one in RSDOS, but I have one in OS9.

For RSDOS, there's very little you can do other than the normal 64k without special programming.

In NitrOS9 it will automatically be recognized and nitros9 will use the extra memory for more processes and more graphics screens in more windows. Vanilla O9 has to be patched to use it (just 2 small patches to ioman and grfdrv, but will react the same once patched). Contrary to what others seem to think, there's MANY more uses other than a ram disk. You can run more than one OS9 program that requires 512k. I usually have about 5 programs going in different windows, each using 64-256k each, some using graphics, and still have enough memory for a medium sized ram disk (96k) and still be able to run my c compiler which is a memory hog itself.

Those that think the 1-2 meg upgrade is just overkill or just for ram disks, don't have one. I have a one meg on my Coco 3 and run VCC in 2 megs and personally, I would be lost with just 512k now. I'm spoiled :-)

 

 


Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com


 

 



-----Original Message-----
From: Josh Harper via Coco <coco at maltedmedia.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Cc: Josh Harper <allencoco at yahoo.com>
Sent: Fri, May 1, 2015 12:14 am
Subject: [Coco] 1 meg coco 3


  hi guys
well I have yet turned my new 1 meg coco 3 on
what is the correct way
2 turn on the coco it has 2 power cables 1 for the coco and 1 for the 1 meg
upgrade
what do I plug in first

how well I know if its working

what can I do
with the new upgrade
thanks guys

-- 
Coco mailing
list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

 

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco