[Coco] Kipper SBC v1 Update

[Salvador Garcia]

Here is another eBay item that shows the pinout:


http://www.ebay.com/itm/USB-To-RS232-TTL-PL2303HX-Auto-Converter-Module-Converter-Adapter-For-arduino-/400385842379


Here is just the image:


http://i.ebayimg.com/00/s/NjAwWDYwMA==/z/0wEAAOxyGStRxuoz/$(KGrHqEOKooFG-4-g7LPBR)uoyv(wQ~~60_57.JPG





-----Original Message-----
From: Kip Koon <computerdoc at sc.rr.com>
To: 'CoCoList for Color Computer Enthusiasts' <coco at maltedmedia.com>
Sent: Sat, Mar 14, 2015 5:26 pm
Subject: Re: [Coco] Kipper SBC v1 Update


Hi Jim,
It should be easy enough to interface.  I could not find any pin out for
this particular item.  Do you have any clue?

Kip
Koon
computerdoc at sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon



>
-----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On
Behalf Of RETRO Innovations
> Sent: Saturday, March 14, 2015 5:29 PM
> To:
CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Kipper SBC v1
Update
> 
> On 3/14/2015 4:15 PM, Kip Koon wrote:
> > Hi Joe,
> > I've got a
friend going over the design now.  I will see if the 5 pin header for a TTL -
USB cable is easy to add.  I need to get a pin out
> for the TTL end of the
cable or find one with separate female headers on each wire.
> Is this what you
are talking about:
> 
>
http://www.ebay.com/itm/USB-To-RS232-TTL-PL2303HX-Auto-Converter-Module-Converter-Adapter-For-arduino-
>
/251876195815?_trksid=p2054897.l4275
> 
> These things are so cheap, I am
thinking you should just not populate the RS232 and the MAX and the caps and
just wire this in to the
> base board, as this is extremely cheap...
> 
> Jim
>

> --
> Coco mailing list
> Coco at maltedmedia.com
>
https://pairlist5.pair.net/mailman/listinfo/coco


-- 
Coco mailing
list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco