[Coco] 6 Chip ^809 Computer -> Kipper SBC

[Joe Grubbs]

I haven't looked in a while, but is Grant using a microcontroller for the interface?



--- Original Message ---

From: "RETRO Innovations" <go4retro at go4retro.com>
Sent: March 11, 2015 1:05 AM
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Subject: Re: [Coco] 6 Chip ^809 Computer -> Kipper SBC

On 3/11/2015 12:01 AM, Kip Koon wrote:
> Hi Guys,
>
> The 6 Chip 6809 Computer is now called the Kipper SBC.
>
> The current version of the 6 Chip 6809 Computer is now called Kipper SBC v1.
>
>
> Kipper SBC v1.1 now has the 74LS04N and resister to control RTS on the
> RS-232 port per Grant Searle's instructions.
>
> Now I will start designing the Terminal and Keyboard PCB.  I originally
> envisioned a multi-PCB Kipper computer.  I'm not sure yet if this will be an
> add on PCB or be put on the Kipper SBC PCB itself so off to Eagle Pro I go.
> :)
Looking at the PCB, I think you have quite a bit of room you can free up
:-) (and no, not by using SMT parts...:-)

Jim

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco