[Coco] 6 Chip 6809 Computer PCB Price

Bill Nobel b_nobel at hotmail.com
Mon Mar 9 18:30:46 EDT 2015


Oops, missed that part, but none the less they will work.  I also have some 6821’s coming as well and am going to modify the circuit a bit to see if I can get at least Drivewire on it.  I am also looking into a MMU circuit that may bring more RAM to the unit.

Bill Nobel

> On Mar 9, 2015, at 4:19 PM, Juan Castro <jccyc1965 at gmail.com> wrote:
> 
> Errrr... the previous link ($16.10) is for a 10pcs bundle. Yeah, it's
> a 2MHz one instead of 3MHz, but it's just over half the price for
> each!
> 
> Juan Castro
> Enviado do meu Olivetti Programma 101
> 
> 
> On Mon, Mar 9, 2015 at 7:15 PM, Bill Nobel <b_nobel at hotmail.com> wrote:
>> They would Juan, but here buy these instead
>> 
>> http://www.ebay.com/itm/HITACHI-HD63C09P-63C09P-6309-8BIT-MPU-DIP-40-x-1PC-/151087599927?ssPageName=ADME:L:OC:CA:1120 <http://www.ebay.com/itm/HITACHI-HD63C09P-63C09P-6309-8BIT-MPU-DIP-40-x-1PC-/151087599927?ssPageName=ADME:L:OC:CA:1120>
>> 
>> They are way cheaper ($2.99 US) and I have bought from this seller before. I have 4 coming
>> 
>> Bill Nobel
>> 
>>> On Mar 9, 2015, at 4:06 PM, Juan Castro <jccyc1965 at gmail.com> wrote:
>>> 
>>> Aha, there ARE E-less Hitachi 6309s! http://www.ebay.com/itm/180971937327
>>> -- would these work?
>>> 
>>> 
>>> Juan Castro
>>> Enviado do meu Olivetti Programma 101
>>> 
>>> On Mon, Mar 9, 2015 at 6:57 PM, Joe Grubbs <jsgrubbs at hotmail.com> wrote:
>>> 
>>>> Right, the E is required for all CoCos, but Kip's 6 chip computer uses the
>>>> standard 6809; the one *without* the E.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> --- Original Message ---
>>>> 
>>>> From: "camillus blockx" <camillus.b.58 at gmail.com>
>>>> Sent: March 9, 2015 5:53 PM
>>>> To: "Bill Pierce via Coco" <coco at maltedmedia.com>
>>>> Subject: Re: [Coco] 6 Chip 6809 Computer PCB Price
>>>> 
>>>> You could be right Arthur, I thought I read it somewhere and it stuck to
>>>> me. I'm defenitly sure about the E mark though. The none E devices will not
>>>> work, I think they're even not pin compatible.
>>>> 
>>>> cb
>>>> cb
>>>> On 3/9/2015 2:13:34 PM, Zippster <zippster278 at gmail.com> wrote:
>>>> That’s right B is the 2mhz part, there is a C as well (3mhz I think).
>>>> 
>>>> - Ed
>>>> 
>>>> 
>>>>> On Mar 9, 2015, at 3:57 PM, Arthur Flexser wrote:
>>>>> 
>>>>> I believe the B is a speed rating, nothing to do with buffered. The CoCo
>>>> 3
>>>>> required the B version, earlier CoCos did not.
>>>>> 
>>>>> Art
>>>>> 
>>>>> On Mon, Mar 9, 2015 at 7:17 PM, camillus blockx
>>>>> wrote:
>>>>> 
>>>>>> For coco you need 2nd link 68B09E B = Buffered E = External Clock
>>>>>> 
>>>>>> cb
>>>>>> 
>>>>>> On 3/9/2015 1:06:31 PM, Joe Grubbs wrote:
>>>>>> Looks good to me. First link is the one you want. Second link is not.
>>>>>> 
>>>> 
>>>> 
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>> 
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>> 
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>> 
>>> 
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>> 
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco



More information about the Coco mailing list