[Coco] Minted buffer size

Sat Mar 7 19:46:02 EST 2015

----- Original Message ----- 
From: "Gene Heskett" <gheskett at wdtv.com>
To: <coco at maltedmedia.com>
Sent: Saturday, March 07, 2015 3:32 PM
Subject: Re: [Coco] Minted buffer size

> On Thursday 05 March 2015 13:04:06 Luis Antoniosi (CoCoDemus) wrote:
>> Yes it will.
...
> 
> However, when the "memory full - press break" pops up, there is no 
> recovery other than tapping the reset button.  

That's why Colorful Sled needs the memory full signal to be working!

I also go to the trouble of giving you a second chance if you want to exit with out saving (With ringing your bell if sound is working).

I first save the edited file to a temp file (Thus more free space on the disk being used is needed) then delete the original file and then do a rename of the temp file to the original file.

I did all this after losing my work and the original file a few times. And until the F2 key toggle is done to allow any editing. When just looking around I keep F2 set to not allow any editing.

The best programs are those written by people that actually use them.

--------------------------
Gene, give Colorful Sled a second chance With the command card printed out!

I my self cannot remember the commands and grab for the printed copy often. 

This is a link to "SLED Card ED6.zip" in PDF format.
http://www.tandycoco.com/forum/download/file.php?id=160

I don't type "Sled" without it handly.
--------------------------

> Cheers, Gene Heskett