[Coco] DE-0 Nano Successfully Programmed!

[Edward Snider]

The newer one, yes. Lower cost ($100 IIRC), and CoCo3 specific I believe.
The nano piggyback PCB has some dip settings for other computers also.

- Ed
On Jun 3, 2015 10:14 PM, "Gary Coulbourne" <bear at bears.org> wrote:

> Wasn't there another version of the board that used a CoreEp4ce6 board
> rather than the de0 nano?
>
> Peace,
> Gary
>
> Sent from my iPad
>
> > On Jun 3, 2015, at 10:49 PM, Steve Batson <steve at batsonphotography.com>
> wrote:
> >
> > This should be helpful. A little worrisome that there are so many errors
> that occur. If you have an additional tips from your experience, would be
> nice to see them too.
> >
> >
> >> On Jun 3, 2015, at 7:34 PM, Kip Koon <computerdoc at sc.rr.com> wrote:
> >>
> >> Hi Everyone,
> >> Ask and ye shall receive.  Gustavo Ranaur Schoenaker wrote a
> programming guide for the DE-0 Nano in Portuguese so here is a link for
> Google's translation.
> >> <
> https://translate.google.com/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=https%3A%2F%2Fsites.google.com%2Fa%2Franaur.net%2Fasaventurasdocolorcomputer%2Fmontando-a-rgb2vga%2Fprogramando-a-altera-de-0-nano&edit-text=
> >
> >> I hope this helps everyone.
> >>
> >> Kip Koon
> >> computerdoc at sc.rr.com
> >> http://www.cocopedia.com/wiki/index.php/Kip_Koon
> >>
> >>
> >>
> >>> -----Original Message-----
> >>> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Steve
> Batson
> >>> Sent: Wednesday, June 03, 2015 10:20 PM
> >>> To: CoCoList for Color Computer Enthusiasts
> >>> Subject: Re: [Coco] DE-0 Nano Successfully Programmed!
> >>>
> >>> That would be awesome. I haven't used one of these, I'm sure I could
> figure it out, but if you just had a simple cheat sheet, it would
> >>> help us skip all the stuff we don't need to know so we can get down to
> the actual steps that need to be done. Be one thing if I wanted
> >>> to use the board for other stuff, but at this point that isn't the
> case. I'm sure others must be in the same boat.
> >>>
> >>> Thanks Kip! :)
> >>>
> >>>
> >>>
> >>>> On Jun 3, 2015, at 6:49 PM, Kip Koon <computerdoc at sc.rr.com> wrote:
> >>>>
> >>>> Hi Steve,
> >>>> That is a great idea!  I'll have include the instructions I found in
> the user manual of the DE-0 Nano that helped me so others won't
> >>> have as much trouble.  They assume some familiarity with Quartus II
> and there may be some people that will have never used it before
> >>> so I may have to add some instructions into the document I'll put on
> my dropbox to describe the entire compiling and programming
> >>> process I used.  That will help others immensely.  Thank you for the
> suggestion.  I appreciate it.
> >>>>
> >>>> Kip Koon
> >>>> computerdoc at sc.rr.com
> >>>> http://www.cocopedia.com/wiki/index.php/Kip_Koon
> >>>>
> >>>>
> >>>>
> >>>>> -----Original Message-----
> >>>>> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Steve
> >>>>> Batson
> >>>>> Sent: Wednesday, June 03, 2015 6:02 PM
> >>>>> To: CoCoList for Color Computer Enthusiasts
> >>>>> Subject: Re: [Coco] DE-0 Nano Successfully Programmed!
> >>>>>
> >>>>> Kip,
> >>>>>
> >>>>> If you can share what you learned about programming the board DE-0
> >>>>> Nano, may a short quick start guide file or printout to go with the
> boards when you ship, that would be awesome.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Steve Batson
> >>>>> Batson Photography
> >>>>> "Today's Special Moments, Tomorrow's Priceless Treasures"
> >>>>>
> >>>>> Website: http://www.batsonphotography.com
> >>>>> Blog: http://www.batsonphotography.com/blog
> >>>>> Our Free Photography Site and Forum:
> >>>>> http://www.digitalphotographerzone.com
> >>>>>
> >>>>>> On Jun 3, 2015, at 12:10 PM, Kip Koon <computerdoc at sc.rr.com>
> wrote:
> >>>>>>
> >>>>>> Hi RGB2VGA Folks,
> >>>>>>
> >>>>>> Just a quick note to let you all know that I finally figured out now
> >>>>>> to program the DE-0 Nano successfully so now I can begin testing the
> >>>>>> RGB2VGA Converter PCBs.  As soon as the connectors come in, I will
> >>>>>> make all the female to female straight-through adapters.  Then
> shipping can commence!
> >>>>>> Whoo-Hoo!  I can finally begin to see the light at the end of the
> tunnel.
> >>>>>> Won't be long now.  Stay tuned.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> Kip Koon
> >>>>>>
> >>>>>> <mailto:computerdoc at sc.rr.com> computerdoc at sc.rr.com
> >>>>>>
> >>>>>> <http://www.cocopedia.com/wiki/index.php/Kip_Koon>
> >>>>>> http://www.cocopedia.com/wiki/index.php/Kip_Koon
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> --
> >>>>>> Coco mailing list
> >>>>>> Coco at maltedmedia.com
> >>>>>> https://pairlist5.pair.net/mailman/listinfo/coco
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Coco mailing list
> >>>>> Coco at maltedmedia.com
> >>>>> https://pairlist5.pair.net/mailman/listinfo/coco
> >>>>
> >>>>
> >>>> --
> >>>> Coco mailing list
> >>>> Coco at maltedmedia.com
> >>>> https://pairlist5.pair.net/mailman/listinfo/coco
> >>>
> >>>
> >>>
> >>> --
> >>> Coco mailing list
> >>> Coco at maltedmedia.com
> >>> https://pairlist5.pair.net/mailman/listinfo/coco
> >>
> >>
> >> --
> >> Coco mailing list
> >> Coco at maltedmedia.com
> >> https://pairlist5.pair.net/mailman/listinfo/coco
> >
> >
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>