[Coco] DE-0 Nano Successfully Programmed!

[Steve Batson]

That would be awesome. I haven't used one of these, I'm sure I could figure it out, but if you just had a simple cheat sheet, it would help us skip all the stuff we don't need to know so we can get down to the actual steps that need to be done. Be one thing if I wanted to use the board for other stuff, but at this point that isn't the case. I'm sure others must be in the same boat.

Thanks Kip! :)



On Jun 3, 2015, at 6:49 PM, Kip Koon <computerdoc at sc.rr.com> wrote:

> Hi Steve,
> That is a great idea!  I'll have include the instructions I found in the user manual of the DE-0 Nano that helped me so others won't have as much trouble.  They assume some familiarity with Quartus II and there may be some people that will have never used it before so I may have to add some instructions into the document I'll put on my dropbox to describe the entire compiling and programming process I used.  That will help others immensely.  Thank you for the suggestion.  I appreciate it.
> 
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
> 
> 
> 
>> -----Original Message-----
>> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Steve Batson
>> Sent: Wednesday, June 03, 2015 6:02 PM
>> To: CoCoList for Color Computer Enthusiasts
>> Subject: Re: [Coco] DE-0 Nano Successfully Programmed!
>> 
>> Kip,
>> 
>> If you can share what you learned about programming the board DE-0 Nano, may a short quick start guide file or printout to go with
>> the boards when you ship, that would be awesome.
>> 
>> 
>> 
>> Steve Batson
>> Batson Photography
>> "Today's Special Moments, Tomorrow's Priceless Treasures"
>> 
>> Website: http://www.batsonphotography.com
>> Blog: http://www.batsonphotography.com/blog
>> Our Free Photography Site and Forum: http://www.digitalphotographerzone.com
>> 
>>> On Jun 3, 2015, at 12:10 PM, Kip Koon <computerdoc at sc.rr.com> wrote:
>>> 
>>> Hi RGB2VGA Folks,
>>> 
>>> Just a quick note to let you all know that I finally figured out now
>>> to program the DE-0 Nano successfully so now I can begin testing the
>>> RGB2VGA Converter PCBs.  As soon as the connectors come in, I will
>>> make all the female to female straight-through adapters.  Then shipping can commence!
>>> Whoo-Hoo!  I can finally begin to see the light at the end of the tunnel.
>>> Won't be long now.  Stay tuned.
>>> 
>>> 
>>> 
>>> Kip Koon
>>> 
>>> <mailto:computerdoc at sc.rr.com> computerdoc at sc.rr.com
>>> 
>>> <http://www.cocopedia.com/wiki/index.php/Kip_Koon>
>>> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>> 
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
> 
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco