[Coco] Current Status of the "Help Send A Fellow CoCoNut To This Year's CoCoFEST" Campaign

[Kip Koon]

Hi Joe,
The cost for the RGB2VGA Converter interface PCB is $45 + $6 shipping.  I will be ordering the PCBs to be fabricated Monday, then ordering all the parts.  I'll be using OSHPark to fabricate the PCBs and since I have to purchase the PCBs in multiples of three, I'm doing orders in sets of three as people commit.

Kip Koon
computerdoc at sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon


-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Joe Grubbs
Sent: Saturday, February 14, 2015 5:25 PM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] Current Status of the "Help Send A Fellow CoCoNut To This Year's CoCoFEST" Campaign

What is the cost and ETA?


> From: computerdoc at sc.rr.com
> To: coco at maltedmedia.com
> Date: Sat, 14 Feb 2015 16:53:07 -0500
> Subject: Re: [Coco] Current Status of the "Help Send A Fellow CoCoNut To	This Year's CoCoFEST" Campaign
> 
> HI Joe,
> Yes, the RGB2VGA converter is for the 9 pin RGB male header on the bottom of the Coco 3.  The converter also has and input and output VGA style 15 pin connectors.  It converts the old 15KHZ video signals from all computers to the current 31KHZ video signals.  Luis has successfully used it with several different retro computer systems.  And yes, from what I have seen in his videos, the picture looks very sharp.  I'm looking forward to eventually building one for myself, but that is a little bit in the future of course.  :)  Check the following link from Luis' web site.  
> https://sites.google.com/site/tandycocoloco/rgb2vga
> It has all the minute details about the RGB2VGA converter.  Luis thoroughly explains the entire operation of the RGB2VGA Converter which includes pictures of the PCB mounted on top of the Altera DE-0 Nano board.  It's a nice small package.
> 
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
> 
> 
> -----Original Message-----
> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Joe 
> Grubbs
> Sent: Saturday, February 14, 2015 11:07 AM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Current Status of the "Help Send A Fellow CoCoNut 
> To This Year's CoCoFEST" Campaign
> 
> Kip,
> 
> I need a refresher... The RGB2VGA converter is for the CoCo3, correct? I assume it adapts the connector under the CoCo to a DB15 for use with a VGA monitor? What's the general consensus on the performance? Does it work well with modern LCD monitors? Also, what is the cost?
> 
> 
> 
> > From: computerdoc at sc.rr.com
> > To: coco at maltedmedia.com
> > Date: Sat, 14 Feb 2015 02:34:16 -0500
> > Subject: [Coco] Current Status of the "Help Send A Fellow CoCoNut To This	Year's CoCoFEST" Campaign
> > 
> > Hi Everyone,
> > 
> > First of all, much thanks goes out to all those who have already 
> > ordered either the RGB2VGA Converter or the Wodpak2+ or both fully assembled PCBs.
> > Every order will certainly help send a fellow CoCoNut to this year's 
> > CoCoFEST - namely me!  :P  I do appreciate everyone who has 
> > participated so far.
> > 
> > I will be finalizing the PCB order with the fabrication house in the 
> > next day or the day two, so if any of you who are interested but 
> > have not yet ordered, please do so as soon as possible.
> > 
> > So far I have paid orders for 3 RGB2VGA Converters and 3 WordPak2+ 
> > fully assembled PCBs.  Thank you again for all who have ordered thus 
> > far.  I'm sending in the PCB designs in tonight and will do the 
> > final order probably Monday.  I was going to ordering from a Chinese 
> > PCB Fabrication house, but they are having their New Year's Day 
> > celebrations this month, so I'm going with my original plan to use 
> > OSHPark.  After the PCBs' order is done Monday, I should have the 
> > finished PCBs back in about 10 days.  By then, the parts orders 
> > should be about ready to arrive as I will put together the finalized orders for parts Monday and sending in those orders as well.
> > 
> > I'm delighted to put these PCBs together for you guys or should I 
> > say for Y'all!  :)  To correctly pronounce Y'all, it should be held 
> > out approximately 1 to 2 seconds.  :P  Thank you all again.  Take 
> > care my friends.
> > 
> >  
> > 
> > Kip Koon
> > 
> >  <mailto:computerdoc at sc.rr.com> computerdoc at sc.rr.com
> > 
> >  <http://www.cocopedia.com/wiki/index.php/Kip_Koon>
> > http://www.cocopedia.com/wiki/index.php/Kip_Koon
> > 
> >  
> > 
> >  
> > 
> > 
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
>  		 	   		  
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
> 
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
 		 	   		  

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco