[Coco] DW and 6551
Stephen H. Fischer
SFischer1 at Mindspring.com
Thu Feb 12 22:07:22 EST 2015
This sounds like a good plan, I just saved the router settings.
The router has been running 24/7/365 for many years ever since it was plugged in.
Yes I have a backup router but where is it. The termites moved ~ 40 boxes around and I cannot find lots of things.
I am going to try some other tests and look for a time period to do the factory reset.
That is the only web page I have seen any problems with.
Is TCP 80 the normal port to use?
Thanks.
SHF
----- Original Message -----
From: <camillus.b.58 at gmail.com>
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Sent: Thursday, February 12, 2015 6:28 PM
Subject: Re: [Coco] DW and 6551
> Hi, couple months ago I had similar problems.
>
> I could not connect to sertain websites and devices, while other pc did just fine.
>
>
> Nobody had an answer for the probem, until I used a old router that I had still laying around.
>
> all worked ok. Gong back to my normal router, problems all over.
>
>
> I reset the router, two times to factory setting and all was fixed.
>
>
> It had todo with internal routing buffer space that was filled up, and could not be released, until then the factory reset.
>
>
> So In your case, lent a router if you do not have a spare, and try then what you wanted to do. If it works then you know its the router. If problems still there then it is your infrastructure. Deinstall network in windows completly. ( remove windows features ). Start up your pc, and reinstall network . By doing this you refresh the TCP/IP stack and that makes windows run the network services as factory settings.
>
>
> hope this helps.
>
>
> cb
>
More information about the Coco
mailing list