[Coco] Nitro9 and 'startup' file

[Chuck Rose]

Hi all,

I'm new to this list and I'm ecstatic to have found a coco list.

Keep in mind that I have quite a bit of experience with Microware's OS9, but haven't actively used it in 15 or 20 years.  I recently found and installed vcc version 1.42 on my pc.  Heck of an emulator.  I also downloaded a virtual hard disk NitrOS9.vhd from the repository on source forge.  

Now on to my problem.  My 'startup' file in the root directory on the virtual hard disk(/dd), doesn't seem to execute any additions that I've added to it.  I don't get any error messages, it just doesn't execute them.  It's nothing complicated about the additions, (tmode .1 pau=1, and chd /dd/my.progs).  So I made a procedure file with just those two commands in it and edited startup to run the procedure file.  No dice, again, no error but command calling my procedure file (in the same directory as startup) was ignored.  So next I tried running my procedure file directly from /dd and the tmode pause worked but it didn't change the directory.  Not sure what could be causing this but it appears to be a bug.  Don't know if it's vcc (no other anomalies noted in RGBDOS), the hard disk image, or NitrOS9 (also no other anomalies noted).  I'm hoping that it's just my lack of experience with NitrOS9 and it something I'm doing wrong.

Info about my setup.  I have vcc configured with 6309 CPU 1.79mhz with 2 megs of memory.  I have just the floppy controller and the hard disk controller in my virtual multipack.  Any ideas?

Thanks for listening  :)

Charles