[Coco] CocoSDC first time startup

[Zippster]

Hi Gene,

You may want to try plugging the SDC directly into the CoCo3 without
the MPI just to make certain it’s working first.

You may have a conflict with something else in the MPI that will have to be
sorted out.

- Ed


> On Feb 1, 2015, at 2:59 PM, Gene Heskett <gheskett at wdtv.com> wrote:
> 
> Greetings;
> 
> I had to do some laundry that took me to the basement, so I plugged in the 
> monitor, powered down the whole setup and plugged the SDC in for the first 
> time.  Into slot one of the coco3 modified MPI. On a coco3.
> 
> Switch set for slot 4, the FD Controller, TC^3 is in slot 3,  deluxe rs232 
> pack in slot 2
> 
> Unfortunately, a plain green screen is all I can get on powerup. So I am 
> assuming there is a magic potion or incantation to bring it up, but I am 
> not conversant with it.  If the 2G SD is not plugged in, the LED will go 
> out when the button is pushed, but if the SD card is inserted, no led.
> 
> Power it back down, remove the cocosdc, power it back up and it boots 
> right up as soon as the HD's get spun up.
> 
> What else do I need to know?
> 
> Thanks
> 
> Cheers, Gene Heskett
> -- 
> "There are four boxes to be used in defense of liberty:
> soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene>
> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS
> 
> -- 
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco