[Coco] RGB2VGA on Amiga W.I.P.

[Zippster]

Dave,

I recently acquired an MM/1, and I was able to get a pretty decent picture right
off the bat.  With a little tweaking it should work pretty well.

This pic is with 82Ω resistors in series between the MM/1 and RGB2VGA board
on the RGB channels, and the syncs relying on the on-board resistors (connected
directly to the CoCo3 port).

<https://drive.google.com/open?id=0B1sgl615FlGncTdsR3pDekJ6QkE <https://drive.google.com/open?id=0B1sgl615FlGncTdsR3pDekJ6QkE>>

Typically bad cell phone pic, but seems pretty close to what I can make out here…

<https://drive.google.com/open?id=0B1sgl615FlGndU10TDF4OWlxN3M <https://drive.google.com/open?id=0B1sgl615FlGndU10TDF4OWlxN3M>>

- Ed


> On Dec 2, 2015, at 10:11 PM, David Ladd <davidwladd at gmail.com> wrote:
> 
> I wonder if that might be one of the reasons the RGB2VGA isn't working as I
> had expected on the MM/1?
> 
> +----------+
> |David Ladd|
> +----------+
> 
> 
> 
> 
> On Wed, Dec 2, 2015 at 4:20 PM, CoCo Demus <retrocanada76 at gmail.com> wrote:
> 
>> It does work, the color resolution is the problem.
>> 
>> I will need 1% resistors on it....
>> 
>> But the final amiga board is different, I need more pins for more
>> colours...
>> 
>> 
>> On Wed, Dec 2, 2015 at 12:20 PM, Richard E. Crislip <rcrislip at neo.rr.com>
>> wrote:
>> 
>>> On Wed, 2 Dec 2015 11:04:39 -0500
>>> Rich Carreiro <rlcarr at gmail.com> wrote:
>>> 
>>>> I'll be in for one of those when it's complete!  I've been dying
>>>> for something like this to be able to connect my Amigas to
>>>> modern monitors.
>>>> 
>>>> On Mon, Nov 30, 2015 at 3:17 AM, CoCo Demus <retrocanada76 at gmail.com>
>>>> wrote:
>>>>> I'm changing the rgb2vga to support Amigas :)
>>>>> 
>>>>> 
>>>>> https://www.youtube.com/watch?v=PGC9veEThMQ
>>>>> https://www.youtube.com/watch?v=XJ9wT8-_fNg
>>>>> 
>>>>> --
>>>>> Coco mailing list
>>>>> Coco at maltedmedia.com
>>>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>> 
>>>> 
>>>> 
>>> 
>>> AT one time there was a Flicker Fixer/Scan Doubler available. I have
>>> one for my A2000s. It works great with my HP1706 plasma monitors. It's
>>> too bad the RGB2VGA adapters developed for the CoCo do not work with
>>> the Ami.
>>>