[Coco] Fuzix

[Mathieu Chouinard]

Kip, I would love to be able to build a multicomp out of a de0-nano but my
understanding of vhdl (fpga) is minimal as of today. But this might be a
nice learning project ... Will be a change from embedded mips, arm and
powerpc I have to deal with at work ;-)
On Apr 8, 2015 7:36 PM, "Kip Koon" <computerdoc at sc.rr.com> wrote:

> Hi Mathieu,
> That would be great!  I have a 6809 Multicomp running Cubix now that I
> will be showing at the CoCoFEST.  I'll be happy to do any testing you
> need.  Please keep me informed on your progress of porting Fuzix to the
> Multicomp.  Check the N8VEM email list as there is some Fuzix development
> going on for the ECB 6x0x SBC VME ATX PCB Eurocard 6U format - 100mm x
> 160mm.  All the files for the Multicomp are found in the FPGA Emulation
> folder on the N8VEM web site.  The link is here.
> <
> http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=FPGA%20emulation
> >
> The Multicomp Bare PCB can be bought here for $16.
> < http://www.smarthome.jigsy.com/fpga>
> The 6x0x SBC VME ATX 6U PCB files are here.
> There is a lot of information to absorb, but basically the Multicomp PCB
> is a pretty simple build.  The picture shows the typical configuration.
> There is further development going on using a Cyclone IV EP4E6 FPGA
> development board by James Moxham and Max Scane on the N8VEM email list.
> <
> http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=ECB%206x0x-ATX-6U
> >
> Check the inventory page for current availability here.
> < http://n8vem-sbc.pbworks.com/w/page/35044530/PCB%20Inventory>
> The 6x0x build is quite another story but very rewarding once you get it
> going!  :)  Have Fun!
>
> Kip Koon
> computerdoc at sc.rr.com
> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>
>
>
> > -----Original Message-----
> > From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Mathieu
> Chouinard
> > Sent: Wednesday, April 08, 2015 6:22 PM
> > To: CoCoList for Color Computer Enthusiasts
> > Subject: [Coco] Fuzix
> >
> > Hi,
> > I was wondering if anyone tried this
> > https://github.com/EtchedPixels/FUZIX
> >
> > I was thinking of porting it to the multicomp or the 6 chip computer
> >
> > Mathieu
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > https://pairlist5.pair.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>