[Coco] CocoSDC

[Darren A]

On Sat, Oct 11, 2014 at 7:33 AM, Zippster <zippster278 at gmail.com> wrote:

> Yes.  Here it is with Mouser part numbers.
>
> - Ed
>
>
> On Oct 11, 2014, at 8:19 AM, Louis Ciotti <lciotti1 at gmail.com> wrote:
>
> > For those of us not getting a full kit, will you provide  BOM for the
> > remaining items we have to get on our own?
> >
>
>
In addition to the parts listed in that file, you also need one of these
widely available SD Card modules:

<http://ebayitem.com/271434917676>

When assembling the board, I recommend you place a piece of foam tape
between the SD card socket and the board. This is to lift the module
slightly so that the header pins don't protrude too far past the bottom of
the board which can otherwise cause it to not rest properly inside an
FD-502 case.

Darren