[Coco] create blank vhd file

Bob Devries devries.bob at gmail.com
Fri Nov 21 00:43:21 EST 2014


Thanks for the replies on this.

I ended up making a blank file of the right number of sectors using a 
Windows programme called HxD.

I then copied it to the SD card, and set it as /sd1, and after changing 
the dmode settings, was able to format it.

I'm still trying to make it bootable. Not successful yet. :(

Regards, Bob Devries
Dalby, QLD, Australia


On 21/11/2014 3:27 PM, David Ladd wrote:
> Bob,
>
> At one time I think there might have been some information in Jeff
> Vavasour's emulator about it as he put VHD support in his emulator
> long ago.  I think he also had a ROM that would boot directly off of
> the VHD that was setup as strickly OS-9.
>
> I will have to go through my archives to find out.  Been a LONG time
> since I have actually dug through my DOS stuff :D
>
> --
> David Ladd
> --
>
>
>
> On Thu, Nov 20, 2014 at 8:41 PM, Bob Devries <devries.bob at gmail.com> wrote:
>> I wonder why everyone thinks that I *must* have BASIC partitions?
>>
>> I DON'T want them. I just want a 128MB drive ENTIRELY for NitrOS9.
>>
>> Anyway, I managed to do it with HxD, a windows hex file editor. This gave me
>> a blank file of the required size, which I can then format with NitrOS9.
>>
>> Regards, Bob Devries
>> Dalby, QLD, Australia
>>
>>
>> On 21/11/2014 11:45 AM, Kip Koon wrote:
>>>
>>> Hi Bob!
>>> I just take one of Bill Pierce's vhd files and reformat it.  This has
>>> worked just fine for me.  I too would like to properly create big files for
>>> my CocoSDC without having to repurpose another file.  If someone has figured
>>> this out, please let me know.  Thanks a bunch.  I hope this helps you.
>>> Darren, how do you create DSK files bigger than 158KB?  Thanks in advance.
>>> Take care my friends.
>>>
>>> Kip Koon
>>> computerdoc at sc.rr.com
>>> http://www.cocopedia.com/wiki/index.php/Kip_Koon
>>>
>>>
>>> -----Original Message-----
>>> From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Bob Devries
>>> Sent: Thursday, November 20, 2014 5:10 PM
>>> To: CoCoList for Color Computer Enthusiasts
>>> Subject: [Coco] creaate blank vhd file
>>>
>>> I'm sure I did have the details of how to create a blank VHD file, but
>>> can't locate it.
>>>
>>> Can someone point me to the instructions?
>>>
>>> I want to create a VHD of 128MiB, which should, if memory serves, have
>>> $7FF80 256-byte sectors under NitrOS9.
>>>
>>> Regards, Bob Devries
>>> Dalby, QLD, Australia
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> https://pairlist5.pair.net/mailman/listinfo/coco
>>>
>>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> https://pairlist5.pair.net/mailman/listinfo/coco
>


More information about the Coco mailing list