[Coco] CocoSDC

[Richard E Crislip]

On Tue, 11 Nov 2014 16:28:51 -0700
Darren A <mechacoco at gmail.com> wrote:

> On Tue, Nov 11, 2014 at 4:14 PM, Richard E Crislip  wrote:
> 
> > <snip>
> >
> > Hi,
> >
> > I don't know if I should ask these questions online or offline, but
> > there is a jumper and dip switch on the board you may have explained
> > already, and I may have gotten stoned and missed it 8-). Anyway,
> > what is the jumper labeled DRQ AUTO? Right now none of the pins are
> > shorted, the short is hanging off one of the pins. Next to it is a
> > four switch micro switch block. All of them are in the off
> > position. The board is labeled "bank 4,2,1" whereas the switch is
> > labeled "1,2,3,4". Finally there is a push button next to the LED,
> > what does it do.
> >
> 
> 
> The jumper and switches are descibed here:
> <http://cocosdc.blogspot.com/p/hardware-guide.html>
> 
> The push button is used to "switch disks" when using a multi-disk
> program as described here:
> <http://cocosdc.blogspot.com/p/multi-disk-programs.html>
> 
> 
> Darren
> 

<sigh> YA might know as soon as I asked the question, I came across a
reference to the site from Nick Marente's recent post. I was reading it
as you responded. Thank you very much for your respectful reply and not
the usual RTFM 8-).

Cheers

Richard