[Coco] DriveWire 4 under Linux: How to add device?

Tue Nov 11 09:43:11 EST 2014

and logout/login again after that.

Luis Felipe Antoniosi

On Tue, Nov 11, 2014 at 7:38 AM, Jens <CoCoList at jensdiemer.de> wrote:

> I would like use the USB DriveWire under Linux.
>
> I see it:
>
> ~ $ sudo lsusb | grep UART
> Bus 001 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x
> UART Bridge / myAVR mySmartUSB light
>
> $ dmesg | grep -ie cp210*
> [17479.466698] usb 1-1: Product: CP2102 USB to UART Bridge Controller
> [17479.548508] usbcore: registered new interface driver cp210x
> [17479.548520] usbserial: USB Serial support registered for cp210x
> [17479.548535] cp210x 1-1:1.0: cp210x converter detected
> [17480.428168] usb 1-1: cp210x converter now attached to ttyUSB0[/code]
>
>
> So it's assigned to "/dev/ttyUSB0"
>
> But the DriveWire 4 java app didn't found a serial port. I have tried to
> use "Add port manually" and use "/dev/ttyUSB0" as the name. But without
> success...
>
> How to setup?
>
>
> --
>
>
> Mfg.
>
> Jens Diemer
>
>
> ----
> http://www.jensdiemer.de
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>