[Coco] For sale? (Another SDC Case Attempt)

[g cox]

Please add me to the list for one fully assembled case.
Geoff
 

     On Friday, November 7, 2014 11:50 AM, "spereira1952 at comcast.net" <spereira1952 at comcast.net> wrote:
   

 Hi Tim, 

I would like one completed case with plates and all the hardware, drilling and attaching. 

Thanks! 
smp 
- - - 
Stephen Pereira 
72 Tirrell Road 
Bedford, NH 03110 
KB1SXE 

----- Original Message -----

Date: Fri, 7 Nov 2014 07:38:11 -0800 
From: tim lindner <tlindner at macmess.org> 
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com> 
Subject: [Coco] For sale? (Another SDC Case Attempt) 
Message-ID: 
<CADftNqyib69XuWJmQBmCaUrEhki9nMARmAVV-iej9Ostyz952Q at mail.gmail.com> 
Content-Type: text/plain; charset=UTF-8 

Thanks everyone for the kind words. I went and bought a bunch of 
scraps from tap plastic. Some clear, some translucent. For $14 I have 
the material to cut about 15 sets. For the clear plastic the engraved 
type is nice. But for translucent I would do a sticker as seen in my 
video. 

So a complete set would be: 

Top and bottom plate. 
3 x 0.5 inch #6 machine screws 
3 x 0.25 inch #6 machine screws 
1 x stand off 5/8 inch tall, 0.25 OD 
2 x stand off 1/8 inch tall, 0.25 OD 
2 x stand off 9/16 inch tall, 0.25 OD 

The stand offs might need some sanding down if the plastic is thicker than 3mm. 

This would be the assembly instructions: 

1. The holes in the plates are all pilot holes, drill them all to size 
to fit the screws. 
2. Using a 1/4 inch drill bit, flare the outside of each hole so the 
screw sits flush. 
3. Attach the 5/8 inch tall stand off to the top plate in the center 
hole with a 1/4 inch screw. 
4. Attach the 2, 9/16 inch tall stand offs to the top plate in the two 
end holes with 1/4 inch screws. 
5. Attach the 2, 1/8 inch tall stands offs in the bottom plate in the 
two end holes with 1/2 inch screws. 
6. Place the PCB on top of the bottom plate, aligning the two end holes. 
7. Bring the top plate together with the bottom plate, aligning center 
stand off and the two end screws. 
8. Screw the two end bottom plate screws to the two top plate stand offs. 
9. Screw the center stand off to the bottom plate with a 1/2 inch screw. 

So... 

Would you want clear (like the pictures I posted yesterday) or 
translucent (like the video I posted this weekend)? 
How many would want completed cases, with plates and all the hardware, 
drilling and attaching? 
How many would want just the plates and hardware? 
How many would want just the plates? 

Let me know and I'll work up some prices. 

-- 
-- 
tim lindner 





-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco