[Coco] MPI Locking Plate

[Kip Koon]

Hi Tom!
I would like to request 3 MPI locking plates.  Please let me know when you
would like the funds.  Thank you in advance.

Kip Koon
computerdoc at sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon


-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of Tom Seagrove
Sent: Monday, November 03, 2014 11:33 AM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] MPI Locking Plate

I would also like to point out, this project is already fully financed and
when I say send me money, people who order will get a product a few days
following.  Hope that puts people's minds at ease over this.

Tom


On Nov 3, 2014, at 11:20 AM, tonym <tonym at compusource.net> wrote:

I'll take one, simply because you're doing a new project for the coco :)

Don't know if I'll ever use it, but I'll support those creating stuff for
the CoCo when I can.

Cheers!

Tony
tonym at compusource.net


---- Original Message ----
From: "Tom Seagrove" <tjseagrove at writeme.com>
Sent: 11/3/2014 10:52:27 AM
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Subject: Re: [Coco] MPI Locking Plate

If 2 or 3 total, not worth my time really.  I figured on doing a run for as
many as can be fit on a standard sheet of plastic.  He will charge me his
cost for the sheet, "machine time" for the run, and I do all the finishing.

So, if enough interest, I will pursue it this week to get material costs and
aching time costs together so we have an idea of totals.  Once we complete
the drawing and prove the concept, then it is simply material and machine
cost....

How many you want if reasonably priced?

Tom


On Nov 3, 2014, at 10:39 AM, Richard E Crislip <rcrislip at neo.rr.com> wrote:

On Sun, 2 Nov 2014 20:56:59 -0500
Tom Seagrove <tjseagrove at writeme.com> wrote:

> Correction now that I took a picture, it is 2 feet of both.  When I 
> used it, it held everything together nice and tight and I  sure we can 
> replicate it.
> 
> Picture upon request....
> 
> 
> On Nov 2, 2014, at 6:52 PM, Tom Seagrove <tjseagrove at writeme.com>
> wrote:
> 
> Couple of questions came in...
> 
> It is for the CoCo 2 and 3 with the smaller MPI.
> 
> It fits 2 feet of the CoCo and 3 on the MPI
> 
> I can get a picture of it later on and send out if needed.
> 
> I can't do "samples" as I am going to have him do them in a batch and 
> then I will test fit each one before releasing it.
> 
> Tom
> 
> 
> On Nov 2, 2014, at 4:16 PM, Tom Seagrove <tjseagrove at writeme.com>
> wrote:
> 
> 
> (Updated subject to reflect proper name)
> 
> On Nov 2, 2014, at 3:33 PM, Tom Seagrove <tjseagrove at writeme.com>
> wrote:
> 
> Digging into boxes yesterday I found my plastic connector that helped 
> attach the MPI to the computer.  The feet of both would fit would fit 
> into holes in this plastic base and keep them from sliding apart.
> 
> My friend has a plastics business and he could CNC a few if there was 
> interest from people wanting one.  Let me know if this is of interest 
> to anyone on the list and I can get a quote from him....
> 
> Tom

If you could give a $$ ball park figure, I am sure folks would be in a
better position to commit to financing your project with a purchase.

Regards, Richard

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco



-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco

-- 
Coco mailing list
Coco at maltedmedia.com
https://pairlist5.pair.net/mailman/listinfo/coco