[Coco] MPI Locking Plate

[Grumpyx]

sounds good, I'll take 2 if you decide to make them.

Malcom

On Mon, Nov 3, 2014 at 10:52 AM, Tom Seagrove <tjseagrove at writeme.com>
wrote:

> If 2 or 3 total, not worth my time really.  I figured on doing a run for
> as many as can be fit on a standard sheet of plastic.  He will charge me
> his cost for the sheet, "machine time" for the run, and I do all the
> finishing.
>
> So, if enough interest, I will pursue it this week to get material costs
> and aching time costs together so we have an idea of totals.  Once we
> complete the drawing and prove the concept, then it is simply material and
> machine cost....
>
> How many you want if reasonably priced?
>
> Tom
>
>
> On Nov 3, 2014, at 10:39 AM, Richard E Crislip <rcrislip at neo.rr.com>
> wrote:
>
> On Sun, 2 Nov 2014 20:56:59 -0500
> Tom Seagrove <tjseagrove at writeme.com> wrote:
>
> > Correction now that I took a picture, it is 2 feet of both.  When I
> > used it, it held everything together nice and tight and I  sure we
> > can replicate it.
> >
> > Picture upon request....
> >
> >
> > On Nov 2, 2014, at 6:52 PM, Tom Seagrove <tjseagrove at writeme.com>
> > wrote:
> >
> > Couple of questions came in...
> >
> > It is for the CoCo 2 and 3 with the smaller MPI.
> >
> > It fits 2 feet of the CoCo and 3 on the MPI
> >
> > I can get a picture of it later on and send out if needed.
> >
> > I can't do "samples" as I am going to have him do them in a batch and
> > then I will test fit each one before releasing it.
> >
> > Tom
> >
> >
> > On Nov 2, 2014, at 4:16 PM, Tom Seagrove <tjseagrove at writeme.com>
> > wrote:
> >
> >
> > (Updated subject to reflect proper name)
> >
> > On Nov 2, 2014, at 3:33 PM, Tom Seagrove <tjseagrove at writeme.com>
> > wrote:
> >
> > Digging into boxes yesterday I found my plastic connector that helped
> > attach the MPI to the computer.  The feet of both would fit would fit
> > into holes in this plastic base and keep them from sliding apart.
> >
> > My friend has a plastics business and he could CNC a few if there was
> > interest from people wanting one.  Let me know if this is of interest
> > to anyone on the list and I can get a quote from him....
> >
> > Tom
>
> If you could give a $$ ball park figure, I am sure folks would be in a
> better position to commit to financing your project with a purchase.
>
> Regards, Richard
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> https://pairlist5.pair.net/mailman/listinfo/coco
>