[Coco] Glenside IDE Drivers NitrOS-9 Disk Image Needed

[Shane Broadbent]

Luis Antoniosi (CoCoDemus <retrocanada76 at ...> writes:

> 
> What kind of CF adapter are you using ?
> 
> I have successfully tested so far: CF to female IDE, and SD to female IDE.
> 
> Does the CF apdater blinks when glenside tries to access it ?
> 
> On Wed, Mar 12, 2014 at 8:25 AM, Daniel Campos
> <daniel.campus at ...> wrote:
> > Tried with another CF card? This can also be a specific issue with your CF.
> >
> > Daniel
> >
> >
> > 2014-03-12 9:16 GMT-03:00 Shane Broadbent <shanetb at ...>:
> >
> >> Daniel Campos <daniel.campus <at> ...> writes:
> >>
> >> Thanks Daniel...yes i forgot to mention, I do have the Jumper set to 50.
> >> Also the CF adapter jumper is set to 'Master'.
> >>
> >> Cheers,
> >> Shane
> >>
> >>
> >>
> >> --
> >> Coco mailing list
> >> Coco at ...
> >> http://five.pairlist.net/mailman/listinfo/coco
> >>
> >
> > --
> > Coco mailing list
> > Coco at ...
> > http://five.pairlist.net/mailman/listinfo/coco
> 

Hi Luis, the CF adapter looks exactly like the one in your video.
But, i just had a though, and found another CF card that I had in the back
of a drawer...it is only 10MB, but this one is a Kodak brand, the other 2
I have are both SimpleTech brand 256MB.
Anyway, as soon as I applied power to the CF adapter with the Kodak card in,
I noticed the Activity LED also flash on for a moment...this does not happen
with the SimpleTech cards.

And now, I do not get the 'No LBA' drive message...HDB-DOS LBA appears to
boot correctly now, straight to the OK prompt.

The 10MB card is too small for the image file...will I cannot get anything
from it when I do a DIR...just get IO ERROR.
But at least the initial issue appears to be CF Card related.

Don't suppose anybody has a 10MB image :-)
Would the LBA offset be different...I assume so ???

Cheers,
Shane