[Coco] Glenside IDE Drivers NitrOS-9 Disk Image Needed

Tue Mar 11 09:36:27 EDT 2014

You just need to make sure your card is set to the proper base
address: FF50 or FF70. The default os-9 I guess is FF70. But I
personally use FF50 and the image I provided to you uses FF50.

And if you use HDB-DOS you need to set the same base address.

On Tue, Mar 11, 2014 at 9:21 AM, Christopher R. Hawks <chawks at dls.net> wrote:
> On Mon, 10 Mar 2014 21:28:54 -0400
> "Kip Koon" <computerdoc at sc.rr.com> wrote:
>
>> Hi Guys!
>>
>> I just installed the Glenside IDE Controller v1.0 on my Coco 1 and I
>> am having problems with getting a good copy of the drivers.  I need
>> to get a disk image of the patched good version of the drivers from
>> someone who has already gone through this dilemma.  I'd like to get a
>> disk image of the utilities as well.  Any help is appreciated.  Thank
>> you ahead of time.
>>
>
> Kip:
>
>     rbsuper.dr and llide.dr from NitrOS9 work just fine with the
> Glenside IDE Controller.
>
>
> Christopher R. Hawks
> HAWKSoft
> --
> Cross country skiing is great if you live in a small country.
>                 -- Stephen Wright
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco

-- 
Long live the CoCo