[Coco] Calibrating disk drives

[tonym]

I just tried it a few minutes ago, and it does exist. 
On the Tandy media, one of them has the *.bas file that you run, which has two options:
B to boot OS-9
T to test disk drive

Tony
tonym at compusource.net


---- Original Message ----
From: "Bill Pierce via Coco" <coco at maltedmedia.com>
Sent: 6/5/2014 1:09:56 PM
To: coco at maltedmedia.com
Subject: Re: [Coco] Calibrating disk drives


Tony, not that I remember.
 
Spencer, you can check your drive speed with these programs/disk images
 
RSDOS
J&M's "Memory Minder" which has disk speed check on it: (the head alignment utils are useless without the reference disk)
http://www.colorcomputerarchive.com/coco/Disks/Utilities/Memory%20Minder%20(Coco%203).zip
 
 and Robert Gault's RPM.b09 in OS9 (basic09)
https://dl.dropboxusercontent.com/u/23059963/Stuff/RPMB09.zip

There are others out there as well. Steve Bjork's "Disktime" for the "Mouse" system is on Rainbow On Disk in the archives (don't remeber which issue, but it was in 86). It's also in the RTSI archive under RSDOS:
ftp://os9archive.rtsi.com/RSDOS/incoming/mouse.lha
 

Bill Pierce
"Today is a good day... I woke up" - Ritchie Havens
 

My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Webmaster of The TRS-80 Color Computer Archive
http://www.colorcomputerarchive.com/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com


 
 
-----Original Message-----
From: tonym <tonym at compusource.net>
To: Spencer <spencerjar at yahoo.com>; CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>; coco <coco at maltedmedia.com>
Sent: Thu, Jun 5, 2014 11:21 am
Subject: Re: [Coco] Calibrating disk drives


Didn't one of the OS-9 disks, don't remember if it was L1 or L2, actually have a 
program telling you drive spindle speed?!?

Coulda' sworn one of them did...

Tony
tonym at compusource.net


---- Original Message ----
From: "Benoit Bleau" <benbleau at gmail.com>
Sent: 6/5/2014 9:26:22 AM
To: "Spencer" <spencerjar at yahoo.com>, "CoCoList for Color Computer Enthusiasts" 
<coco at maltedmedia.com>
Subject: Re: [Coco] Calibrating disk drives

Spencer,
I remember that my old TEC drive ( 26-3022?)  had a tendency to slow down.
 When open the drive , you should see a stroboscopic design printed on the
disk "flywheel" .   There's a potentiometer right besides it that you can
use to adjust the speed.  My memory is a bit fuzzy, but I seem to recall
that using a fluorescent light, it would be easy to tune the speed of the
drive.   There's also some utilities that can mesure the drive speed. I
think that the Kilgus DOS programs had a speed utility ( EDTASM Disk, and
Disk Scripsit).  This would give you the RPM of the drive, and you can
easily adjust the speed of the drive while running the utility.

Benoit.


On Thu, Jun 5, 2014 at 8:16 AM, Spencer via Coco <coco at maltedmedia.com>
wrote:

> Greetings all.
>
> I have a 26-3022 and 26-3029 drives;  both write to disks fine, but when I
> put one disk from one into the other I get the dreaded ?IO Error.  Someone
> told me one or both drives are out of calibration and will ultimately fail
> 100% at some point.
>
> I've never calibrated drives myself.  Is this something that can be done
> at home or is there specialized equipment needed for this?   Or is there
> anyone out there that knows a place that can recalibrate them?
>
> Thank you!
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>

-- 
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco



-- 
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco

 

-- 
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco