[Coco] Coco 3 Crashes shortly after booting NitrOS-9 v3.3.0

Thu Aug 14 01:31:43 EDT 2014

Hi Camillus!
I so much appreciate your explanation.  I pray you are right.  Whew!  I thought I was losing two Coco 3s!  I will try something else to burn in my 512KB Memory Upgrade PCB then.  I'll check this out and let you know the results.  Keep me in your prayers.  :)  Any ideas for a burn-in program for 512KB Memory PCBs that runs on NitrOS-9?  Is there some type of Benchmark program written for the Coco 3?

Kip Koon
computerdoc at sc.rr.com
http://www.cocopedia.com/wiki/index.php/Kip_Koon
http://computerpcdoc.com/

-----Original Message-----
From: Coco [mailto:coco-bounces at maltedmedia.com] On Behalf Of camillus.b.58 at gmail.com
Sent: Thursday, August 14, 2014 12:20 AM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] Coco 3 Crashes shortly after booting NitrOS-9 v3.3.0

Could it be that you overwrite some basic or garbage stack?  Looks like when returning from the disassembler the jump  back to OS9 is corrupt and the cpu jumps into oblivion, = crash. If the return address is on the stack, and that is overwritten, then the coco can’t return and crashes.

I’m not an expert but this happened to me in the past, because I was doing some assembler, but had no clue back then to use the U stack for keeping household of return addresses.

So just a thought, because the problem you describe was exactly what I experienced.  Those things one does never forget…LOL

cba aka Camillus

Sent from Windows Mail

From: Kip Koon
Sent: ‎Wednesday‎, ‎August‎ ‎13‎, ‎2014 ‎10‎:‎43‎ ‎PM
To: CoCoList for Color Computer Enthusiasts

Hi Coco 3 Hardware Experts!

I have a Coco 3 with 512KB Memory that passes the MEMTEST.BIN program just fine so I know all the ram is good.  After booting NitrOS-9 I disassembled BASIC09.  After the disassembly is complete, the very next key I press crashes NitrOS-9.  This is happening on my main Coco 3 system and the TEST Coco 3 I use for testing.  I have pulled the GIME chip out of the Test Coco
3 and reinstalled it.  The Coco 3 still crashes after one disassembly of Basic09.  Do I have a possible thermal problem or is there any other issues to consider?  Thank you in advance for any help you can give.  Take care my friends.

Kip Koon

 <mailto:computerdoc at sc.rr.com> computerdoc at sc.rr.com

 <http://www.cocopedia.com/wiki/index.php/Kip_Koon>
http://www.cocopedia.com/wiki/index.php/Kip_Koon

 <http://computerpcdoc.com/> http://computerpcdoc.com/

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco