[Coco] eBay 6309 chips

Kip Koon computerdoc at sc.rr.com
Sat Apr 19 01:27:18 EDT 2014


Hi Art!
That is something to think about too.  Thank you for your view point as
well.  I appreciate it.
Kip

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
Behalf Of Arthur Flexser
Sent: Saturday, April 19, 2014 12:01 AM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] eBay 6309 chips

The other side of the argument, as I see it:

1.  Unless you're really good at de-soldering and are extremely careful that
all 40 pins have been completely freed before you try to pull the old chip,
you run the risk of tearing a trace with non-destructive removal.  Is it
worth that risk to salvage a 6809 that you're probably never going to use,
having upgraded to 6309s?

2.  6809s may become precious some day, but right now they are available on
eBay for around $5-10 for quantity one, cheaper if you buy several.

Art



On Fri, Apr 18, 2014 at 11:39 PM, Kip Koon <computerdoc at sc.rr.com> wrote:

> Hi Chester!
> How are you going to remove the old 6809 chips from your Cocos?  Are 
> you going to desolder them in what I would call a proper manner or are 
> you going to destroy them by cutting the pins?  I've heard people cut 
> their 6809s out to make it easier to desolder the pins left behind 
> which I can certainly understand.  I just can't see destroying a 
> perfectly good 6809 chip since they are becoming quite precious these 
> days.  I too want to upgrade all my Cocos as well.  I just have not 
> been able to perfect my desoldering techniques.  The tip on my 
> desoldering iron from Radio Shack is a bit too big to perform the job 
> properly.
> I want to put all my 6x09 microprocessors in sockets as well.  Until 
> the new
> 6309 microprocessors are tested, then obviously their condition is
unknown.
> If the pins on the 6809 are cut and the new 6309 is bad then the Coco 
> is down for the count and temporarily out of the picture.  That is a 
> risk I'm not willing to take.  Besides, I just don't like destroying 
> fully functional chips - that is unless they are Fritos Scoops!  ;D 
> Please don't take my thoughts in a bad way.  I'm just trying to figure 
> out how best to accomplish my upgrades so I guess I'm thinking out loud.
>  That's
> something I do a lot.  I seem to think much better if I think out loud or
> write down my thoughts in letters or emails.   Anyway, the 6809 to 6309
> upgrade situation has been on my mind for quite a while now.  I do 
> hope that your 6309 upgrades on all your Cocos goes successfully and 
> without any intermediate problems.  Take care my friend.
> Kip
>
> -----Original Message-----
> From: coco-bounces at maltedmedia.com 
> [mailto:coco-bounces at maltedmedia.com]
> On
> Behalf Of Chester Patterson
> Sent: Friday, April 18, 2014 8:56 PM
> To: 'CoCoList for Color Computer Enthusiasts'
> Subject: [Coco] eBay 6309 chips
>
> Hi. I'm going to pop the 6809s on my Cocos and put in 6309s.
> I am looking to buy some 6309 IC's on eBay. The ones I'm looking at 
> are at
> http://www.ebay.com/itm/181103857635
>
> Is there any experience on the list with this seller/these chips?
> Suggestions? Recommendations?
>
> Thanks much.
>
> Chester
> TI2/KJ4HLT
> Costa Rica
> Come for the beaches! Stay for the beer!
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco




More information about the Coco mailing list