[Coco] AcBBS source code

[Bill Pierce]

You don't use runb, your progam does. Just "load runb" so it's in memory.

I have a bit of advice for you... it may help

Try reading these:
http://www.colorcomputerarchive.com/coco/Documents/Manuals/Operating%20Systems/Getting%20Started%20With%20NitrOS-9.pdf

http://www.colorcomputerarchive.com/coco/Documents/Manuals/Operating%20Systems/NitrOS-9%20Technical%20Reference.pdf

http://www.colorcomputerarchive.com/coco/Documents/Manuals/Operating%20Systems/The%20NitrOS-9%20Level%202%20Windowing%20System.pdf

http://www.colorcomputerarchive.com/coco/Documents/Manuals/Programming/OS-9%20Level%202%20Basic09%20Reference%20(Tandy).pdf

http://www.colorcomputerarchive.com/coco/Documents/Manuals/Hardware/Color%20Computer%203%20BASIC%20Quick%20Reference%20Manual%20(Tandy).pdf

http://www.colorcomputerarchive.com/coco/Documents/Manuals/Hardware/Color%20Computer%203%20Exended%20Basic%20(Tandy).pdf

http://www.colorcomputerarchive.com/coco/Documents/Manuals/Hardware/Color%20Computer%20Disk%20System%20(Tandy).pdf

http://www.colorcomputerarchive.com/coco/Documents/Manuals/Hardware/Color%20Computer%20Disk%20System%20-%20Quick%20Reference%20Guide%20(Tandy).pdf

http://www.colorcomputerarchive.com/coco/Documents/Manuals/Hardware/Color%20Computer%20Operation%20Manual%20(Tandy).pdf


Hope it helps :-)


Bill Pierce
My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Webmaster of The TRS-80 Color Computer Archive
http://www.colorcomputerarchive.com/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com




-----Original Message-----
From: Bill <cwgordon at carolina.rr.com>
To: 'CoCoList for Color Computer Enthusiasts' <coco at maltedmedia.com>
Sent: Sat, Sep 28, 2013 11:23 am
Subject: Re: [Coco] AcBBS source code


O.K., RunB is a merged combination of runb, syscall, inkey and gfx2

When I use the command 'runb' all I get is an Error #043

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
Behalf Of Bill Pierce
Sent: Saturday, September 28, 2013 10:50 AM
To: coco at maltedmedia.com
Subject: Re: [Coco] AcBBS source code

Bill...  AcBBS is written in Basic09 and you probrably need to:

first...

ident -s /dd/cmds/runb

if you get an error 216, then you need to copy runb, syscall, inkey and gfx2
into /dd/cmds
then try the above cmd again.
if all you get in the resulting listing is "runb" then do the following
cmds. if you get all the above cmds listed, then you're ok, do NOT do the
following cmds.

merge /dd/cmds/runb /dd/cmds/syscall /dd/cmds/gfx2 /dd/cmds/inkey
>/dd/cmds/runb2
rename /dd/cmds/runb runb.solo
rename /dd/cmds/runb2 runb
attr /dd/cmds/runb e pe

And sometimes it helps to

load runb

before running the program.
This will most likely solve your problem.

Bill Pierce


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco