[Coco] OS-9 80-column driver is ready

[Mark Marlette]

Mark- Not following what I can tell more about..... ???????




________________________________
 From: Luis Antoniosi (CoCoDemus) <retrocanada76 at gmail.com>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com> 
Sent: Tuesday, September 24, 2013 2:49 PM
Subject: Re: [Coco] OS-9 80-column driver is ready
 

It's not included the superIDE and its RTC. Mark can tell more about it
right ?

Every spot is populated. The ideal would be to have jumpers on it. And
config the address in the descriptor.


On Tue, Sep 24, 2013 at 3:36 PM, Bill Pierce <ooogalapasooo at aol.com> wrote:

>
> Luis,
> Here's a doc I got from somewhere with various port addresses of various
> devices. I added some to it as well.
>
> Everyone check it and see if it's correct or if anything needs to be added
> for other unlisted devices
>
> I will then update the doc.
> It's in MW Word 2008 which should be readable with Open Office in Linux as
> well as others
>
>
> https://dl.dropboxusercontent.com/u/23059963/Stuff/Coco%20Registered%20Port%20Addresses%20and%20Devices.doc
>
> Bill Pierce
> My Music from the Tandy/Radio Shack Color Computer 2 & 3
> https://sites.google.com/site/dabarnstudio/
> Co-Webmaster of The TRS-80 Color Computer Archive
> http://www.colorcomputerarchive.com/
> Co-Contributor, Co-Editor for CocoPedia
> http://www.cocopedia.com/wiki/index.php/Main_Page
> E-Mail: ooogalapasooo at aol.com
>
>
>
>
> -----Original Message-----
> From: Luis Antoniosi (CoCoDemus) <retrocanada76 at gmail.com>
> To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
> Sent: Tue, Sep 24, 2013 2:51 pm
> Subject: Re: [Coco] OS-9 80-column driver is ready
>
>
> The card uses FF78 FF79, this conflicts with the Glenside IDE and the RTC
> right ?
>
> Would be better to change it, but what address would be safe to use to not
> conflict with SuperIDE, RTC, Glenside and GIME ?
>
> Something around FF6x ?
>
>
> On Tue, Sep 24, 2013 at 12:01 PM, Louis Ciotti <lciotti1 at gmail.com> wrote:
>
> > I would be willing to help out with the board assuming you can provide a
> > schematic.
> >
> >
> >
> > Sent from my iPhone
> >
> > > On Sep 24, 2013, at 11:51 AM, "Luis Antoniosi (CoCoDemus)" <
> > retrocanada76 at gmail.com> wrote:
> > >
> > > Well I call it protype because in fact it was a prototype made in 1985
> by
> > > some company called PHB in Texas. Is what is written in the label :P
> > >
> > > I'm doing the schematics and I will try to make it in protoboard, but
> it
> > > will take a while since I'm a software guy not a hardware.
> > >
> > > But yes the circuit is so simple that it can be easily copied. I think
> > the
> > > most difficult part is to find the CRT9128.
> > >
> > > I found in china the CRT9128-000P.  I hope is the same ? If the
> > protoboard
> > > works I can see the possibility to make a batch of it.
> > >
> > >
> > > On Tue, Sep 24, 2013 at 11:41 AM, Al Hartman <alhartman6 at optonline.net
> > >wrote:
> > >
> > >> Pretty neat!
> > >>
> > >> Are you planning to make these for sale?
> > >>
> > >> Also saw the CP/M emulator video, which was pretty neat. I remember
> back
> > >> in the day there was a box that attached to the Coco that was supposed
> > to
> > >> provide a Z-80 CPU and 64k of RAM to run CP/M.
> > >>
> > >> -[ Al ]-
> > >>
> > >> -----Original Message----- From: Luis Antoniosi (CoCoDemus)
> > >> Sent: Tuesday, September 24, 2013 10:44 AM
> > >> To: CoCoList for Color Computer Enthusiasts
> > >> Subject: [Coco] OS-9 80-column driver is ready
> > >>
> > >> Watch the video:
> > >>
> > >> http://www.youtube.com/watch?**v=PTeg_6JqZHA<
> > http://www.youtube.com/watch?v=PTeg_6JqZHA>
> > >>
> > >> I'm very happy with the results. Using OS9L1 now is a pleasure for me
> :)
> > >>
> > >> Something occured to me, since I'm not using the VDG I can switch the
> > CPU
> > >> to 2Mhz right ?
> > >>
> > >> --
> > >> Long live the CoCo
> > >>
> > >> --
> > >> Coco mailing list
> > >> Coco at maltedmedia.com
> > >> http://five.pairlist.net/**mailman/listinfo/coco<
> > http://five.pairlist.net/mailman/listinfo/coco>
> > >>
> > >> --
> > >> Coco mailing list
> > >> Coco at maltedmedia.com
> > >> http://five.pairlist.net/**mailman/listinfo/coco<
> > http://five.pairlist.net/mailman/listinfo/coco>
> > >
> > >
> > >
> > > --
> > > Long live the CoCo
> > >
> > > --
> > > Coco mailing list
> > > Coco at maltedmedia.com
> > > http://five.pairlist.net/mailman/listinfo/coco
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
>
>
>
> --
> Long live the CoCo
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>



-- 
Long live the CoCo

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco