[Coco] DriveWire 4 - Turbo Mode + ROM *SOLVED!*

[Chad H]

P.S.  #$%@! This thing is fast now!  Did DSKINI in 20 seconds by
stopwatch....simply awesome.

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
Behalf Of Chad H
Sent: Sunday, September 22, 2013 11:49 PM
To: 'CoCoList for Color Computer Enthusiasts'
Subject: Re: [Coco] DriveWire 4 - Turbo Mode + ROM *SOLVED!*

Ok, with have verified both the .BIN and the .ROM variants of the DW4 ROMS
in the Toolshed Snapshot are indeed operational (atleast CoCo 2 versions
anyways).  

Some critical (i.e. made the difference!)  points I learned...

*  Changes to the DriveWire 4 configuration do NOT necessarily take effect
after "writing to server" completes.  Should exit the server application and
re-launch it in order to make sure settings are in effect.

*  If you are making changes to DriveWire 4, particularly with the
"DetectDATurbo=True" option, you need to power-down the CoCO unit as well!!!
I was not doing this before and kept getting errors.  Apparently the CoCo
does some sort of 'initialization' at bootup (just before the OK prompt
shows).  Its at this time DriveWire 4 kicks in and says the following...
Sun Sep 22 2013 23:35:14.218  INFO   DWProtocolHandler   dwproto-0-9
Detected switch to 230k mode

Yes, you read that right, "230k mode".  I thought I had read that the CoCo 2
was only doing 115k and that the CoCo3 was doing 230k.  Maybe its just a
standard status message that really just means "double-speed"?  I don't
know.  Also, as Ken pointed out, the base serial bit rate is set at "57600".
It's the CoCo Boot sequence in the Turbo ROM, coupled with the
"DetectDATurbo=True" setting in the DW4 configuration that makes the magic
happen

Hopefully these keypoints and others will be incorporated into the "Starter
Kit" Bill is working on.  Thanks all!  Time to crash now, mission
accomplished.....

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
Behalf Of Chad H
Sent: Sunday, September 22, 2013 10:06 PM
To: 'CoCoList for Color Computer Enthusiasts'
Subject: Re: [Coco] DriveWire 4 - Turbo Mode + ROM

Err.. D'oh (Home Simpson)

That explains that.  Must have gotten crosseyed from trying to solve this.
Will advise when my UV eraser cycles and I'm able to reflash.. Thanks Gene

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
Behalf Of Gene Heskett
Sent: Sunday, September 22, 2013 9:58 PM
To: coco at maltedmedia.com
Subject: Re: [Coco] DriveWire 4 - Turbo Mode + ROM

On Sunday 22 September 2013 22:43:55 Chad H did opine:

> OK I felt like Chris' thread had been hijacked a bit so I started a new
> one specifically for this issue.
> 
> 
> 
> I got DriveWire 4 up and running on a XP box, the Drivewire 3 ROM runs
> fine.
> 
> 
> 
> Using the DriveWire 4 ROM from here..
> http://toolshed.sourceforge.net/snapshots/  it doesn't work no matter
> what I set in the server configuration, always errors.  I did short
> pins 1 and 2 and verified with multimeter.
> 
> 
> 
> I had been used a PORT'd .BIN of the rom that was being LOADM > EXEC.  I
> then went back and flashed a EPROM with the .ROM file and it wouldn't
> even boot..blank screen.   Wondering what was up with that, I started
> eyeing the Hex codes in my Flash editor and found something out of
> whack, or atleast it seems to me.  All "good" ROMs I've encountered,
> even the DW3 ROMS hosted on the Cloud-9 site, begin with the same
> sequence.
> 
> 
> 
> 44 4B 20 08 D7 5F 00 . and so on.  None of the roms in the above
> Toolshed snapshot archive follow this pattern!  Even the DW3 ROMs in it
> are different.  They begin with
> 
> 00 20 30 4F D0 . and so on.  What gives?

You are not looking at a *.rom file then.  I think thats a .bin file.  
There are many others in that directory.  They are correct in my build 
here, built from an hg clone in mid july.  No clue whats happened to the 
main toolshed repo since though.
 
According to the files on the above site, toolshed-2.0 hasn't been touched 
since 2010/04/04...

Frankly I find that very hard to believe, bordering on incredible.  What 
the (expletive deleted) is going on here?

So fess up folks, just where IS the CURRENT, uptodate  toolshed-2.0 
repository?

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)

Real programs don't eat cache.
A pen in the hand of this president is far more
dangerous than 200 million guns in the hands of
         law-abiding citizens.

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco