[Coco] CoCo Cassette Relay (Remote)

[Chad H]

Umm..this is exactly what I'm talking about.  My FD-502 controller has a DW3
EPROM loaded.  I also have a "CoCo FLASH" PCB with DW ROM, they both show
these problems!  Do you have a DW3 ROM that is NOT HDB-DOS based?

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
Behalf Of Luis Antoniosi (CoCoDemus)
Sent: Sunday, October 20, 2013 1:26 PM
To: CoCoList for Color Computer Enthusiasts
Subject: Re: [Coco] CoCo Cassette Relay (Remote)

You need a DW ROM pak. Then it will load them all.

Every game that puts coco back to ram mode and recopies all the rom will
screw the DW in RAM.

I easily modified a Typing Tutor rom pack and installed a 2764 with the DW3
rom on it.


On Sun, Oct 20, 2013 at 1:49 PM, Chad H <chadbh74 at hotmail.com> wrote:

> DriveWire is completely useless for many ROM's and BIN files as the 
> HDB-DOS that supports DriveWire also screws up those programs.
>
>
>
> For example..  ZAXXON will NOT run while HDB-DOS (DriveWire) is running.
> I
> just CLOADM it from tape.    There are others.
>
>
>
> From: Tony Cappellini [mailto:cappy2112 at gmail.com]
> Sent: Sunday, October 20, 2013 12:46 PM
> To: Chad H
> Subject: Re: CoCo Cassette Relay (Remote)
>
>
>
> Ok- but why would you want to use the cassette port when you have 
> drivewire?
>
>
>
> On Sun, Oct 20, 2013 at 10:35 AM, Chad H <chadbh74 at hotmail.com> wrote:
>
> I use the cassette port as much as drivewire, perhaps more.  Physical
> floppies are still my primary medium.   Jameco has 5VDC eletro-mechanical
> relays for cheap.
>
> http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_17
> 4450_-
> 1  for example.
>
>
>
> I still actually use a CCR-81 tape deck.  It is if perfect working order.
>  I
> also have a spare in storage that is New-in-box, only removed for 
> inspection and testing.  The factory power cable/data cable are still 
> sealed in plastic.
>
>
>
> From: Tony Cappellini [mailto:cappy2112 at gmail.com]
> Sent: Sunday, October 20, 2013 12:29 PM
> To: Chad H
>
>
> Subject: Re: CoCo Cassette Relay (Remote)
>
>
>
> Aromat makes a huge selection of relays.
>
> Finding one withe the same current/voltage ratings for the coli & 
> contacts should b very easy.
>
>
>
> Trying to find one with the same physical dimensions and pin 
> configuration will be harder, but is also of less concern.
>
> In a pinch, you could just mount another relay anywhere, and just run 
> small wires to the pads.
>
>
>
> Of course- how often do you really use the cassette port, given that 
> you can use floppies, hard drives, and eliminate the need for a 
> cassette
>
>  by using drivewire?
>
>
>
>
>
>
>
> On Sun, Oct 20, 2013 at 10:22 AM, Chad H <chadbh74 at hotmail.com> wrote:
>
> That is correct, the relay is definitely Double Throw, but only Single 
> Pole.
>
>
>
>
> The underside of the relay is 5 pins  (rough diagram is this)..
>
>
>
>             1           2     3
>
>             4                 5
>
>
>
> Pins 4 & 5 are the Coil points  (Supply 5 volts DC across these and it
>
> latches)
>
>
>
> Pins 1 & 3 are Normally closed  (not used)
>
>
>
> Pins 1 & 2 are Normally open  (Open circuit leaves cassette motor off) 
> These are bridged when the 5V latches the relay and causes the motor 
> to run.
>
> This can also be shown by bridging the first and list pin of a 
> cassette cable while its unplugged from the back of the CoCo, same thing.
>
>
>
> From: Tony Cappellini [mailto:cappy2112 at gmail.com]
> Sent: Sunday, October 20, 2013 10:56 AM
> To: CoCoList for Color Computer Enthusiasts
> Cc: chadbh74 at hotmail.com
> Subject: Re: CoCo Cassette Relay (Remote)
>
>
>
>
> >>That relay is IIRC a dpdt, but could be a spdt.  If dpdt, clean the 
> >>other
>
>
> I have to disagree with this.
>
> There aren't enough leads on the relay in the picture that was posted, 
> to be a dpdt.
>
>
>
> A dpdt relay would require 6 leads for the switch contacts,and two for 
> the coil.
>
>
>
> There are only 5 leads visible, so that would indicate SPDT
>
>
>
>
>
>
>
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>



--
Long live the CoCo

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco