[Coco] Paper for TP-10 Printer

[Mark J. Blair]

On Nov 5, 2013, at 16:42 , Rogelio Perea <os9dude at gmail.com> wrote:
> The TP-10 will handle with no problem a 4" wide paper roll, it's only 1/8"
> narrower, the margins the TP-10 leaves on each side of each printed line is
> 1/2" so there is room to spare, and 1/8" is not that much that the paper
> roll would wobble inside its cradle as it is being pulled.

I tried testing it out with some much narrower paper from my HP48's printer, and the print head caught on the edge of the paper. But it's good to know that there's some room for slop in the paper width.

> Problem with either option above is that the buyer must get a whole case of
> the things, 25 rolls with the first vendor and 36 on the second one listed
> above.

Sounds like that would be a good option if I expect to use the printer heavily, but chopping down a roll of fax paper might be a good experiment to try anyway since a case would probably be way, way more paper than I'd ever need.


-- 
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/