[Coco] NitrOS-9 boot from floppy issue

[Wayne Campbell]

Did you ident sysgo to make sure it's valid? Is the CMDS and contents
attr'd e pe?

Wayne
On Jun 25, 2013 9:19 PM, "Philip Zeigler" <philip at zeiglers.net> wrote:

> I can IDENT the OS9Boot file….everything is good.  It shows DD is there.
>  The bootlist contains ../MODULES/RBF/ddd0_40d.dd and
> ../MODULES/RBF/d0_40d.dd
>
> This is ver030209.  From what I understand from some posts there were
> issues with some of the drivers being wrong…maybe that is the problem.
>
> It is getting all the way through the boot process to the i2xoC.  The C
> means it should be loading the sysgo file.  Usually if the /DD descriptor
> is wrong, you won't get the C you will get and *X.  It gets the C just
> never goes to the next step to turn the window green and start the shell.
>
> Thanks,
>
> Philip
>
>
> On Jun 25, 2013, at 6:16 PM, "Bob Devries" <devries.bob at gmail.com> wrote:
>
> > Are you able to IDENT the OS9Boot file to check if everything is
> correct? I've had instances where some descriptors have been duplicated.
> Also, do you have DD loaded? It should be the same as D0 except for the
> name.
> >
> > Regards, Bob Devries
> > Dalby, QLD, Australia
> >
> > ----- Original Message ----- From: "Philip Zeigler" <philip at zeiglers.net
> >
> > To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
> > Sent: Wednesday, June 26, 2013 8:04 AM
> > Subject: Re: [Coco] NitrOS-9 boot from floppy issue
> >
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>