[Coco] NitrOS9 and B&B XT-RTC
Bill Pierce
ooogalapasooo at aol.com
Mon Jun 17 17:02:45 EDT 2013
Phillip,
First if you've already booted, then you probably already have a "/dd" descriptor in memory. You cannot have 2 "/dd" descriptors in memory at the same time. Just name your HD descriptor "/h0". Once it and the driver are loaded, type "iniz /h0". If you do not get an error, then it should work from this point.
Bill Pierce
My Music from the Tandy/Radio Shack Color Computer 2 & 3
https://sites.google.com/site/dabarnstudio/
Co-Webmaster of The TRS-80 Color Computer Archive
http://www.colorcomputerarchive.com/
Co-Contributor, Co-Editor for CocoPedia
http://www.cocopedia.com/wiki/index.php/Main_Page
E-Mail: ooogalapasooo at aol.com
-----Original Message-----
From: Philip Zeigler <philip at zeiglers.net>
To: CoCoList for Color Computer Enthusiasts <coco at maltedmedia.com>
Sent: Mon, Jun 17, 2013 3:19 pm
Subject: Re: [Coco] NitrOS9 and B&B XT-RTC
Here is what I'm trying to do that isn't working….
I've booted from Nitros9 6309 image from DW.
I've copied the ddmaker and bbhdisk.dr files to /dd/cmds
I've run ddmaker hd to make a new descriptor for the hard drive using the
bbhdisk.dr driver.
I then load bbhdisk.dr and load hd.dd
dir /hd just hangs….hitting break will result in everything giving an error 207
out of memory.
What am I doing wrong?
Thanks,
Philip
On Jun 17, 2013, at 1:50 PM, Philip Zeigler <philip at zeiglers.net> wrote:
> I'm trying to get my CoCo3 system going after too many years away :)
>
> I'm having trouble finding drivers for my B&B XT-RTC so I can see what's on my
ST-225 hard drive.
>
> I don't need to boot to the hard drive, just be able to access it.
>
> My current system is CoCo 3 (6309) 512K with MPI (FDC slot 4, B&B slot 3,
RS232Pak slot 2 and SuperIDE slot 1). I have a CF card in the SuperIDE but I'm
mostly using drivewire.
>
>
> FYI… the ST-225 was my primary hard drive and I did boot to it with XT-ROM
2.4. It had stock OS9L2 on it. I'm hoping to grab a lot of my C source files
from it.
>
> Any help would be appreciated… I used to be good at this 20 years ago!
>
> Thanks,
>
> Philip Zeigler
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco
More information about the Coco
mailing list