[Coco] SuperIDE backup/restore

[Retro Canada]

format you new cf on windows and then using gparted on linux delete all partitions.

then make a dd copy on it as:

sudo dd if=image.img of=/dev/sdb bs=1M count=245


Sent from my TRS-80 Color 1 - model 26-3003B 

On 2013-07-28, at 5:04 PM, Ed Orbea <ed.orbea at gmail.com> wrote:

List Members

My goal is to be able to backup and restore my SuperIDE CF Card.I could copy each HDB-DOS virtual drive to physical floppies (and then copy them to DSK image files).

I could use dsave and make copies of the contents of the various NitrOS-9 directories and sub directories to physical floppies (and then copy them to DSK image files).

But why do I need to do that?

I "should" be able to use (via WinXP) the 'dd' utility from Cygwin or the Win32DI application or WinHex (from X-Ways software) or Disk Imager (by Roadkil.net) to extract an image of the entire CF drive and then restore it.

In order to try to do this, I purchased several 256mg CF cards (which I have referenced in previous posts).

I successfully used the above listed utilities to extract an image from my Cloud9 distribution card.

I generated as MD5 hash for each image (after it was extracted from the CF card) and all hash codes were identical.

I tried several different CF card (that Mark was kind enough to test for me, as I have been struggling with this for several weeks).

The 'target' CF cards are all identical to the Cloud9 distribution CF card according to that is shown via the IDEPROBE utility contained on the Clloud9 distribution disk

  Logical cylinders: 980

  Logical heads: 16

  Logical sectors: 32

  Total sectors: 501760

  LBA: Is Supported

  PIO Timing: 2

The only differences are the Serial Number (obviously this should be different) and the # sectors per R/W multiple(Cloud9 distribution disk = 1, the other CF cards = 4).

So, I should be able to "extract" the image from the Cloud9 distribution CF card and "restore" it to any of the 'matching' CF cards.

The problem is that I can't. And let me explain further.

  I can extract the image (without any failures or errors)

  I can generate a MD5 has of the actual CF card and the extracted
  image, and they match. That tells me that I do not have to do a
  byte-by-byre comparison, as the image is an exact copy of the card.

  I can then restore the image to one of the other CF cards without
  encountering an error or failure

  I can then generate a MD5 hash of the new CF cards and that hash
  matches what has previously generated.

  But when I put the new CF card into the SuperIDE device and power on
  the system (CoCo3), I see the Disk Basic banner, the HBD-DOS LBA
  banner, and then the system either: starts showing 'sparklies';
  starts showing random colors and letters; or just hangs.

  The LED on the SuperIDE remains a solid color (no blinking).

I have tried using only the SuperIDE cartridge (no MPI)

I have tried various MPI configurations/combinations.

Everything works correctly, when I am using the Cloud9 distribution card and doesn't work when using the new CF card

My CoCo system (as mentioned in previous posts) is:

  CoCo3 (6809)

  Cloud9 Triad memory upgrade

  Roy's VGA converted

  MPI with slot 4 (either Disto SCII FDCC with DW3 in Eprom OR TRS-80
  26-3129 'long' FDCC); Slot 3 Orch-90; Slot 2 Modified SSC; Slot 1
  SuperIDE.

Your help is appreciated


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco