[Coco] Glenside IDE update

[Luis Antoniosi (CoCoDemus)]

Two layer only.


On Fri, Dec 13, 2013 at 4:20 PM, Kip Koon <computerdoc at sc.rr.com> wrote:
> For my setup, I could put in a switch somewhere on the PCB and label it IDE
> No power and CF Power SW.  There seems to be space.  Brian, is this just a 2
> layer PCB and not a 4-layer one?  I don't what to disturb any hidden traces
> if there are any.  Until I find the right switch though, I'll just run the
> jumper from +5v to pin 20 and use my CF adapter only.  Thank you for ya'll's
> input.  Take care my friends.
> Kip
>
> -----Original Message-----
> From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
> Behalf Of Luis Antoniosi (CoCoDemus)
> Sent: Friday, December 13, 2013 12:28 PM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Glenside IDE update
>
> The pin 20 is N/C on IDE (most cables don't even have it) but is used as
> power in those CF adapters as they drain little power.
>
> For a mechanical drive you will probably need a PSU.
>
>
> On Fri, Dec 13, 2013 at 12:24 PM, Brian Goers <briang0671 at sbcglobal.net>
> wrote:
>> On 12/13/2013 12:30 AM, Kip Koon wrote:
>>>
>>> Hi Luis!
>>> Genius!  I like that solution!  How did you figure that out?  Can an
>>> IDE hard drive still be connected up to the Glenside IDE controller
>>> after this modification is done?
>>> Kip
>>
>>
>> I do not think the CoCo power supply can handle the power needs of a
>> IDE drive.
>>>
>>> -----Original Message-----
>>> From: coco-bounces at maltedmedia.com
>>> [mailto:coco-bounces at maltedmedia.com]
>>> On
>>> Behalf Of Luis Antoniosi (CoCoDemus)
>>> Sent: Thursday, December 12, 2013 9:58 AM
>>> To: CoCoList for Color Computer Enthusiasts
>>> Subject: [Coco] Glenside IDE update
>>>
>>> Hi all,
>>>
>>> I manage to power the CF adapter directly from the IDE connector. You
>>> just have to power the pin 20 and the CF adpater will work without
>>> any other cable.
>>>
>>> https://pbs.twimg.com/media/BbSepmcCcAEvZaY.jpg:large
>>>
>>> The next step is to put this inside the coco :D
>>>
>>> --
>>> Long live the CoCo
>>>
>>> -
>>
>>
>> --
>>
>>  Brian Goers     Vice President of Special Events
>>                     http://glensideccc.com/newindex.shtml
>>
>>              The 23nd Annual "Last" Chicago CoCoFEST!
>>
>>     Fairfield Inn & Suites Lombard           April 26 & 27, 2014
>>     645 West North Avenue                 Saturday 10 am to 5 pm
>>     Lombard, IL 60148                 Socialize - 8 pm to 10 pm or beyond
>>     1-630-629-1500                       Sunday 10 am to 3 pm or beyond
>>
>>
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>
>
>
> --
> Long live the CoCo
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco



-- 
Long live the CoCo