[Coco] Adapting a V9958 64-pin Chip to fit a Solderless Breadboard

Jim Harre jim at tweech.com
Mon Dec 2 23:32:38 EST 2013


Hi, Kip -

I have 10 - 15 of those 64 pin sockets that I picked up for a Z180 
project that never went anywhere. They were hard to find, and as I 
recall, a couple bucks apiece. The sockets are solder tail with no 
manufacturer's name or mark (that I could find).

    <*> Jim

On 12/2/2013 9:04 PM, Kip Koon wrote:
> Hi Luis!
> I created a breadboard adapter sometime ago for the SDIP 64 socket that the
> V9958 VDG fits, but I have not sent it off to be fabricated yet.  The design
> files are finished I believe.  I need to check that though, because I
> remember printing an actual size PCB layout and fitting the actual chip to
> the printout like I usually do when finishing a PCB.  When I'm done with the
> design, would you like one?  I can finish it up and get the PCB fabricated
> and have them available assembled or unassembled as a kit.  I'll need to
> find 0.7 pin spaced sockets for this PCB though.  I wouldn't want to have to
> unsolder 64 pins!  Ouch!
> You mentioned that you were considering the V9990.  I remember something not
> being as good as the V9958, so the V9958 is what I chose.  I don't remember
> what that "something" was, maybe it was just the price of the chip at that
> time, I just don't remember.  I am very interested in your Yamaha V9958
> based VGA compatible Video Display PCB.  Please let me know how you are
> doing with the designing of it.  Thank you for the design files for the 80
> Column Video Display WordPak.  I appreciate it.  Thanks a bunch.  Take care
> my friend.
> Kip
>
> -----Original Message-----
> From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On
> Behalf Of Luis Antoniosi (CoCoDemus)
> Sent: Thursday, November 28, 2013 2:25 PM
> To: CoCoList for Color Computer Enthusiasts
> Subject: Re: [Coco] Adapting a V9958 64-pin Chip to fit a Solderless
> Breadboard
>
> Hi Kip, did you have any progress on that ?
>
> After my successfully try with 80 column card I want to move to a 9958 one.
>
> I was think in soldering wires from an SDIP-64 socket but I'm having
> problems even finding a sdip-64 socket.
>
> So I ultimately thought that i should make the prototype on OSD Park,
> becasue if I had to solder 4, 5  evem 10 wires for fixing missing
> connections that would be by far better than soldering 64 pins !
>
>
>
>
>
> On Fri, Apr 5, 2013 at 2:48 AM, Kip Koon <computerdoc at sc.rr.com> wrote:
>
>> Luis,
>> I have some disappointing news for you my friend.
>> The advertised chip in that ad is exactly the same chip I received.
>> All markings on my chip exactly match the markings in that ad.
>> Trust me, that is not a dip64 chip.  It is an sdip64 chip which stands
>> for "shrink dip".  The pins are closer together.  They are spaced 0.07"
> apart.
>> The pins are not spaced 0.1" apart.  Even the advertiser is the same.
>> I don't think a dip64 version exists, unfortunately.  I wish it did.
>> The Technical data book only mentions a shrink dip version of the chip
>> at the very beginning of the document.  It's a very interesting chip,
>> I just need to interface to it somehow.  Thanks for the heads up
>> though.  It was an excellent try.  The title of that ad is what lead
>> me to read it too and ultimately buy it.  If you want a dip64 version
>> of this chip, this is not it.
>> Kip
>>
>> -----Original Message-----
>> From: coco-bounces at maltedmedia.com
>> [mailto:coco-bounces at maltedmedia.com]
>> On
>> Behalf Of Luis Antoniosi (CoCoDemus)
>> Sent: Thursday, April 04, 2013 3:34 PM
>> To: CoCoList for Color Computer Enthusiasts
>> Subject: Re: [Coco] Adapting a V9958 64-pin Chip to fit a Solderless
>> Breadboard
>>
>> what is this ?
>>
>>
>> http://www.ebay.com/itm/IC-V9958-YAMAHA-VDP-IC-MSX-DIP64-NEW-GOOD-QUAL
>> ITY-1P CS-/300818499421?pt=LH_DefaultDomain_0&hash=item460a2e075d
>>
>>
>> On Thu, Apr 4, 2013 at 4:27 PM, Kip Koon <computerdoc at sc.rr.com> wrote:
>>
>>> Luis,
>>> There is a dip-64 version?  The V9958 Technical Data Book says it is
>>> a shrink dip.  I'd love to get a dip-64 v9958.
>>> Kip
>>>
>>> -----Original Message-----
>>> From: coco-bounces at maltedmedia.com
>>> [mailto:coco-bounces at maltedmedia.com]
>>> On
>>> Behalf Of Luis Antoniosi (CoCoDemus)
>>>
>>> You can find the DIP-64 version of the V9958 (aka msx-video). Is the
>>> same used on all msx2+ and Turbo Rs.
>>>
>>> On Thu, Apr 4, 2013 at 3:10 PM, Kip Koon <computerdoc at sc.rr.com> wrote:
>>>
>>>> Daniel,
>>>> This is a much clearer version than I have.  However, the V9958
>>>> Technical Manual v1.0 only covers the differences.
>>>> You will also need the V9938 Technical Data Book at the following
>>> address.
>>>> http://www.msxarchive.nl/pub/msx/docs/datasheets/v9938.pdf
>>>> I have an excellent PDF of it, but I don't remember where I got
>>>> it, so I'll email  to anyone who needs it.  I'll post it here when
>>>> I find
>> it.
>>>> Kip
>>>>
>>>> -----Original Message-----
>>>> From: coco-bounces at maltedmedia.com
>>>> [mailto:coco-bounces at maltedmedia.com]
>>>> On
>>>> Behalf Of Daniel Campos
>>>> Sent: Thursday, April 04, 2013 9:26 AM
>>>> To: CoCoList for Color Computer Enthusiasts
>>>> Subject: Re: [Coco] Adapting a V9958 64-pin Chip to fit a
>>>> Solderless Breadboard
>>>>
>>>>
>>>> http://primrosebank.net/computers/mtx/projects/mtxplus/V9958-Techn
>>>> ic
>>>> al
>>>> -manua
>>>> l_v1.0.pdf
>>>>
>>>> V9958 is used on the MSX2+ and TurboR MSX machines.
>>>>
>>>> Regards,
>>>> Daniel
>>>>
>>>>
>>>> 2013/4/4 Alan Jones <alwanbi at live.com>
>>>>
>>>>> Hi Kip,
>>>>> Can you point me to the data sheet for V9958 chip?
>>>>> I would like to take a look at it.
>>>>> Thanks...
>>>>>
>>>>> Alan
>>>>>
>>>>> -----Original Message-----
>>>>> From: coco-bounces at maltedmedia.com
>>>>> [mailto:coco-bounces at maltedmedia.com]
>>>>> On
>>>>> Behalf Of Kip Koon
>>>>> Sent: Thursday, April 4, 2013 3:44 AM
>>>>> To: Coco Email List
>>>>> Subject: [Coco] Adapting a V9958 64-pin Chip to fit a Solderless
>>>>> Breadboard
>>>>>
>>>>> Has anyone ever adapted a V9958 Video Graphics Controller 64-pin
>>>>> chip with tiny spacing on the pins to fit a solderless breadboard?
>>>>> I was not aware of this very small pin spacing when I was
>>>>> researching the chip.  I liked the chip's capabilities and at
>>>>> $6.40 a chip, the price was too good to pass up!
>>>>> This will take some doing.  I may have to compromise and use an
>>>>> earlier chip.  Maybe the TMS9918 or TMS9928.  Were there any
>>>>> others in that chip line.
>>>>>
>>>>> Were there other chip manufacturers with interesting Video
>>>>> Graphics chips I should consider?
>>>>>
>>>>> Kip
>>>>>
>>>>>
>>>>> --
>>>>> Coco mailing list
>>>>> Coco at maltedmedia.com
>>>>> http://five.pairlist.net/mailman/listinfo/coco
>>>>>
>>>>>
>>>>> --
>>>>> Coco mailing list
>>>>> Coco at maltedmedia.com
>>>>> http://five.pairlist.net/mailman/listinfo/coco
>>>>>
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> http://five.pairlist.net/mailman/listinfo/coco
>>>>
>>>>
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> http://five.pairlist.net/mailman/listinfo/coco
>>>>
>>>
>>>
>>> --
>>> Long live the CoCo
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/mailman/listinfo/coco
>>>
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/mailman/listinfo/coco
>>>
>>
>>
>> --
>> Long live the CoCo
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>>
>
>
> --
> Long live the CoCo
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>
>




More information about the Coco mailing list