[Coco] can't compile Toolshed on CygWin

[Bob Devries]

When i do "make install" (on Toolshed-code) I get an error for cocofuse, 
telling me that fuse.h is missing.

Regards, Bob Devries
Dalby, QLD, Australia

----- Original Message ----- 
From: "Luis Antoniosi (CoCoDemus)" <retrocanada76 at gmail.com>
To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
Sent: Friday, April 05, 2013 7:51 AM
Subject: Re: [Coco] can't compile Toolshed on CygWin


> don't forget the:
>
> make install
>
> to copy all binaries into the /bin
>
> for nitros9 you will need also lwtools:
>
> http://lwtools.projects.l-w.ca/
>
> save the 
> http://lwtools.projects.l-w.ca/releases/lwtools/lwtools-4.7.tar.gzinto
> the /usr/src for example
>
> cd /usr/src
> tar xvf lwtools-4.7.tar.gz
> cd lwtools-4.7
> make
> make install
>
> cd /usr/src
> hg clone 
> http://nitros9.hg.sourceforge.net:8000/hgroot/nitros9/nitros9nitros9
> cd nitros9
> hg update -r lwtools-port
> export NITROS9DIR=/usr/src/nitros9
> make
> make dsk
>
> have fun
>
> to create your own distros is very simple just go to the
> nitros9/level1/makefile or level2/makefile and change the correct
> descriptors and format options. I made a superIDE 180K distro for me in
> this way.
>
>
>
> On Thu, Apr 4, 2013 at 5:34 PM, Bob Devries <devries.bob at gmail.com> wrote:
>
>> Thanks, Luis.
>>
>> I followed your example, and Toolshed compiled ok.
>>
>> Do you have a similar example for the NitrOS9 code?
>>
>> Thanks for your help. I hope someone changes the website instructions!
>>
>> Regards, Bob Devries
>> Dalby, QLD, Australia
>>
>> ----- Original Message ----- From: "Luis Antoniosi (CoCoDemus)" <
>> retrocanada76 at gmail.com>
>> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
>> Sent: Thursday, April 04, 2013 11:45 PM
>> Subject: Re: [Coco] can't compile Toolshed on CygWin
>>
>>
>>  erh CVS ? You mean mercurial right ? Are you taking this one ?
>>>
>>> hg clone 
>>> http://hg.code.sf.net/p/**toolshed/code<http://hg.code.sf.net/p/toolshed/code>toolshed-code
>>>
>>> then you do:
>>>
>>> cd build/win32
>>> make
>>>
>>> If you get errors is because you're using gcc4 instead of 3. Change int
>>> the
>>> build\win32\Makefile this line to:
>>>
>>> export CC=gcc-3
>>>
>>> And be happy. I just rebuild a fresh check-out.
>>>
>>> Luis Felipe.
>>>
>>>
>>>
>>> On Thu, Apr 4, 2013 at 12:00 AM, David Ladd <drencor at gamepixel.net>
>>> wrote:
>>>
>>>  Bob,
>>>>
>>>> At this point I did try to build toolshed inside cygwin and it did fail
>>>> for
>>>> me as well.  Though I have systems I use linux natively on.  If you do
>>>> have
>>>> a spare system that has linux on it I would go that route.  If not then 
>>>> I
>>>> might try using VirtualBox with a linux install in a vBox session.
>>>>
>>>> There are others that might may have found a workaround for this on
>>>> CygWin
>>>> and might chime in on this.
>>>>
>>>> I myself would just go a full linux system myself as I have had other
>>>> source packages not want to compile under cygwin in the past.  So 
>>>> rather
>>>> than fight a mule I just replaced the mule with a race horse so to 
>>>> speak
>>>> :P
>>>> :D
>>>>
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> http://five.pairlist.net/**mailman/listinfo/coco<http://five.pairlist.net/mailman/listinfo/coco>
>>>>
>>>>
>>>
>>>
>>> --
>>> Long live the CoCo
>>>
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/**mailman/listinfo/coco<http://five.pairlist.net/mailman/listinfo/coco>
>>>
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/**mailman/listinfo/coco<http://five.pairlist.net/mailman/listinfo/coco>
>>
>
>
>
> -- 
> Long live the CoCo
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco