[Coco] Dragon & Drivewire

[Aaron Wolfe]

Well you are getting something, which is good.  Unfortunately the
values aren't mapping to valid op codes.  They look mostly consistent,
so that's good too.  I'd say either the XOR feature is "doing it
wrong", not enabled, or we have a baud rate mismatch.

Could you send a bug report using the option in the help menu (after
causing some failures)?  That will send me much more useful
information.
-Aaron


On Mon, Oct 29, 2012 at 6:00 PM, Ken H. <dragon.atv at gmail.com> wrote:
> After several attempts I still haven't succeeded to setup the Dragon with
> Drivewire 4.3.0
>
> I am using an adapter based on Darren A's diagram here:
> http://tandycoco.com/forum/viewtopic.php?f=71&t=104
> AFAIK my cable matches exactly Darren's Diagram. I have enabled
> ProtocolXORInputBits and restarted Drivewire.
>
> On the Dragon side, I am running HDB-DOS 1.4 DW3 CoCo2 (running on the
> Dragon in CoCo mode)
> The Drivewire log shows
>  29 Oct 2012 23:38:58 WARN  [dwproto-0-13  ] UNKNOWN OPCODE: 116 t
> 29 Oct 2012 23:38:58 WARN  [dwproto-0-13  ] UNKNOWN OPCODE: 2
> 29 Oct 2012 23:38:58 ERROR [dwproto-0-13  ] Port 4 is not open
> 29 Oct 2012 23:39:01 WARN  [dwproto-0-13  ] UNKNOWN OPCODE: 116 t
> 29 Oct 2012 23:39:01 WARN  [dwproto-0-13  ] UNKNOWN OPCODE: 6
> ....
>
> I attached the complete log (5KB zipped)
>
> Any suggestions?
> Perhaps we're XORing the wrong bits?
>
> Ken
>
>
>
> On Mon, Oct 22, 2012 at 2:50 AM, Aaron Wolfe <aawolfe at gmail.com> wrote:
>
>> The new 4.3.0 version has an option for this, untested...  (if this
>> works, I'll add Dragon to the setup wizard with it preset, etc).
>>
>> For now, to enable:
>>
>> In the Config menu, choose "Configuration Editor".
>>
>> Along the top of the editor, toggle "Device" and "Show Advanced Items".
>>
>> Look for "ProtocolXORInputBits".  Toggle to true.
>>
>> Click "Write to Server" so the config is sent to the server.
>>
>> You'll have to then either Choose "Restart Instance Device" from the
>> config menu or just restart DriveWire before it takes effect.  I'll
>> make that smoother once we have it working correctly.
>>
>> -Aaron
>>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>