[Coco] VCC Artifact color switch

[Roy Lores]

Ok if you deleted the Ini file my recommendation is to re-install VCC. 
the pallete switch is by pressing [F1] and keeping it pressed while you 
turn VCC's display off by pressing [F9] that should do it.

On 10/15/2012 2:16 PM, Retro Canada wrote:
> but is F1 + F5
>
> You need to reset it.
>
> On Mon, Oct 15, 2012 at 2:10 PM, Stephen H. Fischer
> <SFischer1 at mindspring.com> wrote:
>> Hi,
>>
>> Still no joy.
>>
>> Now when I press F1 I get a "G" on the screen.
>>
>> And I cannot get out of seeing the noise when RGB is selected.
>>
>> I deleted "Vcc.ini" from the Virtual Store and that did not even help.
>>
>> Will someone running Vista please zip up the copy of "Vcc.ini" in the
>> Virtual Store and send it to me so I can compare with mine.
>>
>> TIA
>>
>> SHF
>>
>>
>> ----- Original Message ----- From: "Robert Gault" <robert.gault at att.net>
>> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
>> Sent: Monday, October 15, 2012 7:03 AM
>> Subject: Re: [Coco] VCC Artifact color switch
>>
>>
>> Luis Fernández wrote:
>>> Press F1
>>> note: but F1 is Joystick button too
>>>
>> Very good Luis! I did not imagine that anyone would prefer the keyboard over
>> mouse input (the default), but it makes all the difference.
>>
>> To swap artifact colors with hold F1, press F9, press F9, you must have both
>> joysticks in mouse mode. Once the artifact colors are swapped, you can go
>> back
>> to keyboard mode for the joysticks.
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>>
>>
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
>
>