[Coco] Question about Hard Drive Image for NitrOS9...

[Steve Batson]

I'm using VCC as well. Here's what's it set for so for. Again, DOS255 starts up NitrOS9 fine.
- MPI Slots:
4 - FD-5023 - Hard Drive + Cloud9 RTC2 - Orchastra 901 - Empty
I've got the RGB DOS setting in the emulator. I've also got the emulator set for 8 Meg of RAM and 6309 for the CPU. I didn't mess with the other settings. I don't see anything on the other drives, but I get free space showing if I do a DIR x on the drives, so I know the space is there. I'm not having success listing contents of the empty drives in NitrOS9, so I don't know if there's anything on those drives that RGB DOS can't see or not. 
when I used the pwd command, it's returning /dd as the drive. I thought it was drive numbers, at least that's what I see in the OS-9 documentation I'm looking through.The default drive is obviously set to the NitrOS9 drive since I can see it's commands and I get a directory listing if I do DIR there.
What am I missing?

----------------------------------------
From: "Luis Fernández" <luis46coco at hotmail.com>
Sent: Sunday, March 25, 2012 1:58 PM
To: "COCO" <coco at maltedmedia.com>
Subject: Re: [Coco] Question about Hard Drive Image for NitrOS9... 

Hi
I use the VCC Emulator
In cartridge select the HD Drive 0 and set the virtual disk

In MPI Select 3
You can also select 4 and FD-502 Config, select RGB Two
Type Dir 1, to Dir254
Dir or Dir 0 is Empty and DIR 255 Is Nitros9 Boot

Type DOS 255 for Nitros9
---------------------------------------------------------------------------------
Making 
CoCoDskUtilPack V 1.0.10.zip  
http://cococoding.com/cocodskutil/ Thank Aaron Wolfe
My personal blog: http://www.luis45ccs.blogspot.com
---------------------------------------------------------------------------------

> From: steve at batsonphotography.com
> To: coco at maltedmedia.com
> Date: Sun, 25 Mar 2012 13:05:22 -0700
> Subject: [Coco] Question about Hard Drive Image for NitrOS9...
> 
> Sorry for the stupid question, but I have no experience with OS9 or CoCo 
> Hard Drives or Hard Drive images on the emulators.
> Does anyone know if there's any software on the HD image that is configured 
> with NitrOS9? I can't recall where I downloaded it, but it was loaded and 
> configured and I can start up NitrOS9 using the DOS255 command. It boots up 
> and I can see the various files and can run commands, get help, etc.
> What I haven't figure out yet, how to see if there's anything else on the 
> image that I can run besides the OS stuff. Also, where can I download OS9 
> software and how can I get it into the HD image? 
> Any help will be appreciated.
> Thanks.
> Steve
> 
>  
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco

--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco