[Coco] Success! Re: HDB-DOS build fixes. Untested as of yet.

[Juan Castro]

I'm seeing things like this in various places in the code:

          puls      cc,dp,x,u,pc        ; restore registers and return
          setdp     $00

Shouldn't the setdp be BEFORE the return?

On Mon, Dec 31, 2012 at 1:55 AM, Robert Gault <robert.gault at att.net> wrote:
> Juan's messages got me working again on HDBDOS 1.4 for Drivewire and I've
> got the Coco1 version working!!
>
> In addition to the conditionals in the dwread.asm and dwwrite.asm files
> there also is a problem with the make file. Here is the Coco1 section. Note
> the line marked with !!!!!!!!!!!!!!
>
> # DW3 CoCo 1
> hdbdw3cc1.rom: ../cocoroms/ecb_equates.asm hdbdos.asm
>  mamou -aDW -aLevel=1 -aBAUD38400 -q -mr ../cocoroms/ecb_equates.asm
> hdbdos.asm -o$@
>
> hdbdw3cc1.bin: preload postload hdbdw3cc1.rom
>  cat preload hdbdw3cc2.rom postload > $@       !!!!!!!!!!!!!!!!!!!!!!!!
>
> hdbdw3cc1.wav: hdbdw3cc1.bin
>  dd if=$< bs=1 skip=5 of=hdbtmp count=8240
>  makewav hdbtmp -r -d0x4fd0 -e0x4fd0 -o$@ -nHDBDW3C1
>  rm hdbtmp
>
> That line should be
>
> cat preload hdbdw3cc1.rom postload > $@
>
> in order to correctly create the LOADM version of the ROM.
>
> =================
>
> I've changed the conditionals in the attached routines. They may not be
> minimal code but are much easier, I think, to follow.
>
> Robert
>
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>