[Coco] HDB-DOS build fixes. Untested as of yet.

[Juan Castro]

Gotcha. I already see it's assembling the wrong DWWrite code when in 38400
mode. Fixing that as we speak.

On Sun, Dec 30, 2012 at 2:59 PM, David Ladd <drencor at gamepixel.net> wrote:

> Just thought I would point out that the current HDB-DOS source code is in
> the Toolshed Repo.
>
> You should be able to download the Toolshed repo and get the full source
> for the HDB-DOS 1.4
>
> So far HDBDOS 1.4 DW3 Becker CoCo3 , HDBDOS 1.4 DW3 Becker CoCo2, HDBDOS
> DW3 CoCo3, and HDBDOS DW3 CoCo2 have been tested working.
>
> I am not sure about the CoCo1 of the HDBDOS DW3 since I do not have a CoCo1
> to test the current HDBDOS 1.4 code on.
>
> On Sun, Dec 30, 2012 at 10:51 AM, Charlie Pelosi <chazbeenhad at hotmail.com
> >wrote:
>
> > Hi Juan. I downloaded and programmed an eprom of the hdbdoscc1.rom from
> > the link you included
> >
> > .
> >
> > The system starts and I see HDB-DOS 1.3 DW3 COCO 1
> >
> >
> >
> > It still does not work though, I just get I/O error on the coco and
> > UNKNOWN OPCODE on the DW4 sever (4.3.0)
> >
> >
> >
> > And older version of the rom 1.1D works fine, so the config is good.
> >
> >
> >
> > I do notice something hard to describe. When the coco 1 tries to do I/O
> > through DW the screen gets these very subtle verticle lines that jump all
> > over, almost like interference.....
> >
> >
> >
> > Charlie
> >
> >
> >
> >
> >
> > Sent from Windows Mail
> >
> >
> > From: Juan Castro
> > Sent: December 30, 2012 10:27 AM
> > To: CoCo List
> > Subject: [Coco] HDB-DOS build fixes. Untested as of yet.
> >
> >
> >
> > In the makefile that's in the hg repository, there's this command which,
> > supposedly, should generate a list of equates:
> >
> > mamou -q -mr equates.asm bas.asm -sa > cb_equates.asm
> >
> > And a similar one for the ECB equates. Thing is, that command generates a
> > text file that's NOT a valid ASM file with EQUs. Rather, it looks like
> > this. The build, of course, fails miserably:
> >
> > Symbol table:
> > ABS        $BC93     ALLCOL     $00B5     ANGLE      $00E8     ARYDIS
> > $0008
> > ARYEND     $001F     ARYTAB     $001D     ASC        $B6A0     ATTCTR
> > $0988
> > AUDIO      $A990     BACDST     $A074     BAKCOL     $00B3     BASIC
> > $A000
> > (...etc)
> >
> > So I did a small AWK script to create the correct EQU list from that
> text.
> > I also added the build of a CoCo 1 ROM by defining the BAUD38400 symbol,
> > which wasn't being done. That, I hope, may fix my DW woes with the CoCo
> 1.
> >
> > All of this is as yet untested. Will do that later today. The diff and
> the
> > .ROM files I generated are at
> http://users.vialink.com.br/jcastro/hdbdos/
> >
> > Juan
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
> > --
> > Coco mailing list
> > Coco at maltedmedia.com
> > http://five.pairlist.net/mailman/listinfo/coco
> >
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>