[Coco] Arduino question

[Frank Pittel]

Mark,

Can you recommend a good low cost (read cheap) dev/evaluation kit for the Atmel chips?

A bit over a month ago I got interested in the "new" generation of microcontrollers when
I was looking for a way to cheaply run a stepper motor for a automated film processer. Many
years ago I got a robot kit on a whim from fry's which got put away after the initial OCD wore
off. The kit used the parallax basic stamp and since then I've settled on the Parallax
Propeller for the film processer.

I'm not married to that processer and when I finish the program for the film processer (I'm
responsible for the controls and a friend is handling the mechanics) I plan on looking at the
picaxe that Steve mentioned last week and think that it would be a good idea to look into the
Atmel offerings.

The Other Frank



On Wed, Oct 05, 2011 at 03:59:07PM +0000, Mark Marlette wrote:
> 
> Several years ago, at one the the ChicagoFests, I met a guy that was attempting to use the AVR platform to emulate the 6809.
> 
> Not sure what happened to this as I haven't seen him there again.
> 
> Chris Hawks worked for him or at the same company.
> 
> Chris???
> 
> I am very verse in the AVR platform have many of the dev kits and tools. It is a blast!
> 
> Regards,
> 
> Mark
> http://www.cloud9tech.com
> 
> 
> ----- Original Message -----
> From: "gene heskett" <gheskett at wdtv.com>
> To: jdagget at gate.net
> Cc: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
> Sent: Wednesday, October 5, 2011 10:52:51 AM
> Subject: Re: [Coco] Arduino question
> 
> On Wednesday, October 05, 2011 11:51:52 AM jdagget at gate.net did opine:
> 
> And your account at gate.net is refusing my messages, James.
> 
> > Gene
> > 
> > The ATmel AVRs are more like the HC11/HC12 in assembly programming.
> > 
> > There are some similarities and uniquicness of the AVR that has to be
> > taken into account inporting Nitros09 over to say an XMega AVR. There
> > are 32 8 bit general purpose registers. Register 31 and 32 act as a 16
> > bit Z register, 29 and 30 would correspond to the Y register and 28 and
> > 29 would correspond to the X register of the 6809.
> > 
> > 6809 code may be easier to port over. Not sure if 6309 is real easy or
> > not.
> > 
> > The XMega series is as powerful an 8 bit processor as there is that is
> > still in production. There are some neat things they do that are
> > better. I like the RAMPx instruction where any of the 26 general
> > purpose registers can be concacted with the Index registers to form 24
> > or 32 bit registers. You can point to any where in a 24 bit memory map.
> > There also is a DMA on some flavors.
> > 
> > It truly would be a neat project and a rather lengthy undertaking to do
> > though.
> > 
> > 
> > james
> > 
> > On 2 Oct 2011 at 18:07, gene heskett wrote:
> > > Thanks Mark.
> > > 
> > > Silly Q?  Is this atmel chip equipt with the command set that would
> > > let nitros9 be ported to it?
> 
> 
> Cheers, Gene
> -- 
> "There are four boxes to be used in defense of liberty:
>  soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> It was all so different before everything changed.
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
> 
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco