[Coco] DE1 - More data

[Aaron Wolfe]

On Mon, May 30, 2011 at 8:49 AM, Steven Hirsch <snhirsch at gmail.com> wrote:
> On Sun, 29 May 2011, Aaron Wolfe wrote:
>
>> one other thing that occurred to me.. originally you just needed to
>> write the coco rom to the beginning of flash on the board, but at some
>> point that changed and you need to write the coco rom, then
>> immediately after that the DECB rom.  maybe you want to check that
>> you've done that?  just an idea.
>
> No, good thought.  I'm going to try re-writing them, but it does appear that
> both are in place.  When it powers up I see the HDB-DOS splash screen.  If
> either or both of the images were missing, I do not think that would occur.
>

You mean you see the stock DECB message, not HDB-DOS, right?  If you
are seeing HDBDOS, that would explain a lot, since it will not work at
all on the FPGA board.  You need stock coco rom and stock decb rom.


>
> --
>
>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco
>