[Coco] Coco compatible monitors...

[Mark Ormond]

Ok, back to the original part of the thread.

I got around to making my cable today, I used the pinout located 
at http://pinouts.ru/all/Cm8CoCoRGB_pinout.shtml and of course made my cable BACKWARDS!

After nothing working, I found the following pinout.

http://os9projects.com/CD_Archive/INFO/MONITOR/NEC/CoCo_NEC3D.pdf

I wired up that adapter and plugged it in, and was greeted with a picture, stable with great color.
So a NEC AccSync LCD71V works great with the Coco3 with nothing but a simple cable adapter.

I also made the RGBI to rgb adapter located here.

http://www.commodore128.de/64kabel9.htm

Worked ok with my 128 for 16 Color RGBI, and better with my Tandy 1000sx.

Later,
dabone

-----Original Message-----
From: coco-bounces at maltedmedia.com [mailto:coco-bounces at maltedmedia.com] On Behalf Of Mark Ormond
Sent: Friday, July 01, 2011 9:33 AM
To: CoCoList for Color Computer Enthusiasts
Subject: [Coco] Coco compatible monitors...

I've got some NEC Accusync LCD 71Vs in my shop. And playing with groovymame I found that they will sync to 15 and 24k signals,so I hooked one up to my Amigas, but they only display NTSC correctly, pal screens get cut off (I think the monitor only does 240 lines @ 15k). Do you think these will work with the Coco3 with a cable adapter?
.7v p2p on the input voltages, what does the 3 output?

Just a thought.

(As a note, the tech specs on this monitor say Synchronization Range - Vertical 56 - 75 kHz ,Horizontal 31.5 - 81.1 kHz, but this isn't correct.)

Later,
dabone


--
Coco mailing list
Coco at maltedmedia.com
http://five.pairlist.net/mailman/listinfo/coco