[Coco] drive wire 4 help

[Todd Wallace]

Ok, if thats the config u are using, i can see why its not working. If you look at this line:  <DefaultDiskSet>nos9-6809l2</DefaultDiskSet> and <CurrentDiskSet>nos9-6809l2</CurrentDiskSet> .  Both are telling drivewire 4 to use the diskset called "nos9-6809l2", which if you scroll down, u see that set has one disk in slot 0. therefore there is nothing in slot 4.  You should create a custom diskset and then point the defaultdiskset and currentdiskset settings to it making sure that that the <drive> number specified is 4.

- Todd Wallace

On Jan 15, 2011, at 4:43 PM, Richard Hawk wrote:

> 
> ----- Original Message ----- From: "Todd Wallace" <dragonbytes at cox.net>
> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
> Sent: Saturday, January 15, 2011 3:57 PM
> Subject: Re: [Coco] drive wire 4 help
> 
> 
>> Do you have a .dsk mounted in slot 4 in the disk config? maybe try showing me ur xml config file with pastebin.com or something so I can see it for myself
>> 
>> - Todd Wallace
>> 
>> On Jan 15, 2011, at 3:24 PM, Richard Hawk wrote:
>> 
>>> i did that copy and past the <HDBDOSMode>true</HDBDOSMode> at the last line in the instance before the warning is that no changes below this line in the config.xml file
>>> then do drive off and i cant acess the drive 4 on drive wire now
>>> 
>>> 
>>> ----- Original Message ----- From: "Todd Wallace" <dragonbytes at cox.net>
>>> To: "CoCoList for Color Computer Enthusiasts" <coco at maltedmedia.com>
>>> Sent: Saturday, January 15, 2011 11:56 AM
>>> Subject: Re: [Coco] drive wire 4 help
>>> 
>>> 
>>>> In Drivewire 4 config, there is a setting called HDBDOSMode.  If you add this line   <HDBDOSMode>true</HDBDOSMode> into the Instance section of config.xml, then Drivewire 4 will use the proper offset to allow you to access .dsks mounted after drive 1. What I do, is mount the source .dsk into drive slot 4 in DW4 (since 0-3 are the real floppies), then do DRIVE OFF, then put a blank floppy into drive 0, and do a BACKUP 4 TO 0. You should note though, if you use OS9, HDBDOSMode will totally screw things up if its enabled while you are using OS9.  I'm sure Aaron Wolfe can explain better than me the specifics.  Good luck
>>>> 
>>>> - Todd Wallace
>>>> 
>>>> On Jan 15, 2011, at 11:46 AM, Richard Hawk wrote:
>>>> 
>>>>> how do i back up a floppy image.dsk to a real floppy through drive wire 4.  drive wire 4 works i can load .dsk images and then go to the coco3 and read the .dsk  and play games . just cant backup my deskmate i been working on to a real floppy.  i have hdb-dos 1.2 dw3 coco3 rom in multislot 2 and real floppy controler in slot 4
>>>>> 
>>>>> i tried poke &hff7f,3
>>>>> drive off
>>>>> got the floppy to work but cant read drive 4 in drive wire 4
>>>>> 
>>>>> so i can backup drivewire4 drive4.dsk to floppy drive real on drive 0
>>>>> 
>>>>> any help would be greatly apprecicated
>>>>> 
>>>>> richard hawk
>>>>> okeechobee, fl
>>>>> 
>>>>> 
>>>>> --
>>>>> Coco mailing list
>>>>> Coco at maltedmedia.com
>>>>> http://five.pairlist.net/mailman/listinfo/coco
>>>> 
>>>> 
>>>> --
>>>> Coco mailing list
>>>> Coco at maltedmedia.com
>>>> http://five.pairlist.net/mailman/listinfo/coco
>>> 
>>> 
>>> 
>>> --
>>> Coco mailing list
>>> Coco at maltedmedia.com
>>> http://five.pairlist.net/mailman/listinfo/coco
>> 
>> 
>> --
>> Coco mailing list
>> Coco at maltedmedia.com
>> http://five.pairlist.net/mailman/listinfo/coco
> <config.xml>
> --
> Coco mailing list
> Coco at maltedmedia.com
> http://five.pairlist.net/mailman/listinfo/coco